August 06, 2025, 12:21:02 pm
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Main
|
Monitor/Video Forum
|
Hantarex mtc28EQ2 input configuration
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: Hantarex mtc28EQ2 input configuration (Read 1743 times)
0 Members and 1 Guest are viewing this topic.
imtapha
Trade Count:
(
0
)
Full Member
Offline
Posts: 10
Last login:December 24, 2024, 11:09:27 am
Hantarex mtc28EQ2 input configuration
«
on:
August 20, 2008, 02:27:57 pm »
Hi. I have an Alpine ski 2 which has a 28inch hantarex polo that has died. I have a nos Hanterax mtc28EQ2 which has a variety of input possibilities on D-type, scart and s-video. would it be possible to wire this to my Alpine 2 and if so how? hope someone can help. pic of mtc28 below
Logged
grantspain
I personally prefer "bog trotter"
Trade Count:
(
+1
)
Full Member
Offline
Posts: 6177
Last login:July 25, 2025, 09:21:43 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #1 on:
August 20, 2008, 03:01:34 pm »
you can use the scart,
there is a thread at the top of the monitor page
Logged
imtapha
Trade Count:
(
0
)
Full Member
Offline
Posts: 10
Last login:December 24, 2024, 11:09:27 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #2 on:
September 04, 2008, 11:32:09 am »
have tried using the scart wired 4 rgb and although there is an image on screen the colours are very pale and the image has a shadow and is not very well defined. does anyone have any ideas?
Logged
grantspain
I personally prefer "bog trotter"
Trade Count:
(
+1
)
Full Member
Offline
Posts: 6177
Last login:July 25, 2025, 09:21:43 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #3 on:
September 04, 2008, 03:01:59 pm »
you need more than 4 wires if using the scart,follow the instructions on the thread
Logged
imtapha
Trade Count:
(
0
)
Full Member
Offline
Posts: 10
Last login:December 24, 2024, 11:09:27 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #4 on:
September 05, 2008, 02:52:38 am »
sorry for the confusion was being lazy wired 4 scart didnt mean 4 wires should have said wired for scart. i did follow instructions in thread and ended up with fault described
Logged
grantspain
I personally prefer "bog trotter"
Trade Count:
(
+1
)
Full Member
Offline
Posts: 6177
Last login:July 25, 2025, 09:21:43 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #5 on:
September 05, 2008, 06:19:30 pm »
do you have an impedence switch,maybe marked 1v or 0.75
Logged
imtapha
Trade Count:
(
0
)
Full Member
Offline
Posts: 10
Last login:December 24, 2024, 11:09:27 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #6 on:
September 06, 2008, 03:10:17 am »
no impedence switch
Logged
grantspain
I personally prefer "bog trotter"
Trade Count:
(
+1
)
Full Member
Offline
Posts: 6177
Last login:July 25, 2025, 09:21:43 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #7 on:
September 06, 2008, 04:41:37 am »
maybe try the rgb d plug,i know the tech at hantarex very well so if you wish i can ask him the pinout of that plug
i will call him on tuesday as i am off work until then
Logged
imtapha
Trade Count:
(
0
)
Full Member
Offline
Posts: 10
Last login:December 24, 2024, 11:09:27 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #8 on:
September 06, 2008, 05:00:23 am »
that would be great many thanks
Logged
imtapha
Trade Count:
(
0
)
Full Member
Offline
Posts: 10
Last login:December 24, 2024, 11:09:27 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #9 on:
September 29, 2008, 12:09:18 pm »
hi bog trotter any joy with pin outs on the d type vga input
Logged
grantspain
I personally prefer "bog trotter"
Trade Count:
(
+1
)
Full Member
Offline
Posts: 6177
Last login:July 25, 2025, 09:21:43 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #10 on:
September 29, 2008, 01:42:54 pm »
sorry mate i had completely forgot,will do tomorrow
Logged
grantspain
I personally prefer "bog trotter"
Trade Count:
(
+1
)
Full Member
Offline
Posts: 6177
Last login:July 25, 2025, 09:21:43 am
Re: Hantarex mtc28EQ2 input configuration
«
Reply #11 on:
October 01, 2008, 05:50:58 am »
o.k there are 2 versions of this,1 for the u.s market and 1 for europe
europe pinout
1-ground
2-n/c
3-red
4-green
5-blue
6-n/c
7-n/c
8-horizontal(comp) sync
9-vertical sync
u.s version
1-ground
2-comp sync
3-blue
4-green
5-red
6,7,8,9-ground
Logged
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Main
|
Monitor/Video Forum
|
Hantarex mtc28EQ2 input configuration