Author Topic: Adding coin door, In MAME can i have it use 5,6 and 2 other keys as "coin 1 / 2" (Read 1060 times)

mrclean · « **on:** July 23, 2008, 04:16:05 pm »

on the side of my current MAME Cab I have 2 "pinball buttons", which also double as Coin 1, and Coin 2 keys 5 and 6 etc.. is there any way I can have other "keys" in addition to 5 & 6 function as my add coin buttons ? I have an IDE Cable hooked up into a mini pac, and while testing the free wires that arent being utilized with ultimarcs winipac i have about litterally 7 free keys.. such as : "r" etc..

Ginsu Victim · « **Reply #1 on:** July 23, 2008, 04:48:37 pm »

Just going into the button setup in MAME and select COIN 1 and press the button you want, then select it again without moving off of it, and press the switch on the coin mech. Then do the same for COIN 2.

Hope that was clear enough.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Adding coin door, In MAME can i have it use 5,6 and 2 other keys as "coin 1 / 2" (Read 1060 times)

mrclean

Adding coin door, In MAME can i have it use 5,6 and 2 other keys as "coin 1 / 2"

Ginsu Victim

Re: Adding coin door, In MAME can i have it use 5,6 and 2 other keys as "coin 1 / 2"