Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Paint bottom of cabinet?  (Read 1957 times)

0 Members and 1 Guest are viewing this topic.

KillerV

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 41
  • Last login:June 10, 2012, 11:38:22 pm
Paint bottom of cabinet?
« on: June 24, 2008, 08:35:56 pm »
Hey all, I've been reading this forum for a while. I'm about 75% done with my MAME cabinet (which I will be posting in the project thread very soon), and I'm at the prime/paint stage. I was wondering if I should paint the bottom of the cab. It won't be seen. And I don't want to lay the cab on it's side after painting. Thanks.

Here's a peek:

« Last Edit: June 25, 2008, 09:15:59 am by KillerV »
Logged

Blanka

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2248
  • Last login:January 25, 2018, 03:19:28 pm
Re: Paint bottom of cabinet?
« Reply #1 on: June 25, 2008, 01:37:15 am »
I painted even the inside in certain areas. What if you spill water over your floor or CP? MDF/particleboard is not very fond of water.
A pitty you made the CP smaller. Would have been nicer if it was a continuation of the side panels.
« Last Edit: June 25, 2008, 01:38:49 am by Blanka »
Logged

KillerV

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 41
  • Last login:June 10, 2012, 11:38:22 pm
Re: Paint bottom of cabinet?
« Reply #2 on: June 25, 2008, 09:41:01 am »
Quote from: Blanka on June 25, 2008, 01:37:15 am
I painted even the inside in certain areas. What if you spill water over your floor or CP? MDF/particleboard is not very fond of water.
A pitty you made the CP smaller. Would have been nicer if it was a continuation of the side panels.

Good point. I guess I'll be painting the bottom.
Well, the cp is not really that small. Just enough for 2 sticks and a bunch of buttons, and a trackball in the future. Here's the cardboard prototype.
Logged
Pages: [1]
  
Go Up
« previous next »