Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Disabling NullDC GUI  (Read 1739 times)

0 Members and 1 Guest are viewing this topic.

ScooterMAC

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 43
  • Last login:April 15, 2012, 12:47:20 am
Disabling NullDC GUI
« on: May 10, 2008, 02:12:10 am »
Is there a way to disable the GUI of nlldc? I Searched the forum and google but couldn't find anything. I also couldn't find the option under the config file. Was there something I missed? It's not that big of a deal, it would just look nicer when games are loaded from MameWah. Thanks.


**EDIT**
Just to clarify my problem. When the game is selected under mamewah, the nulldc gui screen shows for about 2 seconds or so. I just wanted to get rid of this. Thanks.
« Last Edit: May 10, 2008, 02:34:03 am by ScooterMAC »
Kick Ass!

northerngames

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2927
  • Last login:April 09, 2016, 04:18:51 pm
Re: Disabling NullDC GUI
« Reply #1 on: May 10, 2008, 10:49:25 am »
check for a .ini perhaps look for something like launch gui 1 and set it to 0 if it can be found or even possible.

ScooterMAC

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 43
  • Last login:April 15, 2012, 12:47:20 am
Re: Disabling NullDC GUI
« Reply #2 on: May 10, 2008, 11:12:00 pm »
check for a .ini perhaps look for something like launch gui 1 and set it to 0 if it can be found or even possible.

There is a line that say "load gui on start up=blabla.dll" I changed that to =0. But when it loads it comes up with a error. I also tried leaving it blank.
Kick Ass!

northerngames

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2927
  • Last login:April 09, 2016, 04:18:51 pm
Re: Disabling NullDC GUI
« Reply #3 on: May 13, 2008, 03:45:01 pm »
perhaps leave it on 1 for start but on close make it 0 if possible.

ScooterMAC

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 43
  • Last login:April 15, 2012, 12:47:20 am
Re: Disabling NullDC GUI
« Reply #4 on: May 14, 2008, 09:48:11 am »
perhaps leave it on 1 for start but on close make it 0 if possible.

There is not a option for that. Just load gui on startup.
Kick Ass!

northerngames

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2927
  • Last login:April 09, 2016, 04:18:51 pm
Re: Disabling NullDC GUI
« Reply #5 on: May 14, 2008, 11:52:47 am »
is your mamewah dash and the gui dash in question set at the same resolution setting with the same 16 or 32 bit color setting?

could try that if they differ becuase I know it can cause flicker.