I would be interested in at least 1, maybe 2 or 3 since I have a few friends that are getting ready to build a jukebox. Couple questions?
1. How did you mount the screen?
2. Could you make it so it just holds the monitor and NOT the computer? Just the top half.
3. How do you get to the inside incase you need to fix/replace something?
4. The screen you used, is it like this one? If so I have this same one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=180264222548&ssPageName=STRK:MEWA:IT&ih=008
1. He used a tap and die set. We made the case at the shop then he finished it on his own time.
2. That would be quite easy. It's customizing it to the monitor that is the bear.
3. The mdf back screwed on by the same tap and die method. I personally would add small blocks of plexi to the sides where the holes could be drilled to avoid cracking the sides.
4. It did look exactly like that one. He purchased it, but we did decase it and it had that front on it. I have the 15" version from the popular thread in the jukebox forum that I could customize it for as well.
If I do this, it will be for the standard 15" and 17" monitors mentioned above with an extra 1/8" bevel all the way around the inside to compensate for the touchscreen wires. Anyone who has had one of these monitors understands what I am talking about.
Very nice job!
With the clear plexi, you could do some neat effects with painting the inside. Mirror finish, tinting, even marquee style art.
Sweet work.
Thanks!
I think you need to offer a 17" and a 15" screen version. I would be up for one of these McCoy, hook up with me on MSN for a chat.
Totally agree... I would make a limited run with a 15" and 17" openings and call it done. If you even attempt to customize, it'll be a big pain in the ass. People will have to expect to do a little BYO.
I agree completely. The one thing I could do is add button holes for various things in random spots. It wouldn't be hard for me to mock one of these up in sketchup and leave it up to the buyer to add where they would like additional holes. It doesn't take long to tweak the original, it's just that multiple changes can be a pain. If it is being made out of mdf, then byo isn't that bad, but with plexi, people seam timid.
I think you need to offer a 17" and a 15" screen version. I would be up for one of these McCoy, hook up with me on MSN for a chat.
I'll hook it up.
I thought it was good, but it is too small for a normal sized motherboard/power source, etc...
Hell with the standard sized mobo's! Make'em do it right - with a small mobo. I wouldn't want to see it much bigger.
I agree. My buddy did link me to the parts he used, but they were stupid expensive.