Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: hantarx 25 black line Problem Solved!!!!  (Read 1325 times)

0 Members and 1 Guest are viewing this topic.

john_abey

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:September 07, 2011, 03:51:12 pm
hantarx 25 black line Problem Solved!!!!
« on: March 15, 2008, 11:38:31 pm »
95 midway wrestle mania
wired a jamma fingerboard to monitor and sound
would like some if a sync issue or another problem
wired sync with wires twisted together
not separate

<a href="http://s246.photobucket.com/albums/gg98/john_abey/?action=view&current=DSC01564.jpg" target="_blank"><img src="http://i246.photobucket.com/albums/gg98/john_abey/DSC01564.jpg" border="0" alt="arcadesplitscreen"></a>
« Last Edit: March 18, 2008, 11:54:57 am by john_abey »

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: hantarx 25 black line
« Reply #1 on: March 16, 2008, 06:01:39 am »
what model number hanatarex? polo 1,polo2 ?
my bet this is a polo 1 chassis which is cga(15khz) and you have connected it to a pc which vga(31khz),thats why you have 2 pics
maybe read this
http://forum.arcadecontrols.com/index.php?topic=66402.0

john_abey

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:September 07, 2011, 03:51:12 pm
Re: hantarx 25 black line
« Reply #2 on: March 16, 2008, 12:34:55 pm »
thanks for your quick reply grantspain :cheers:
i am using soft 15 with nvidia gforce 5200 and nvidia drivers only have 15kHz installed
res set to 600 x 480
polo 25" serial# 40029

twisted the sync wires together to make composit should I rewire and use both sync wires
to there own spot on monitor. ???

checked VGA cable pinouts a couple of times check finger board there is continuity to the monitor

no video amplifer just using 1 volt video signals

if there is anyymore info needed please just ask
thanks in advance

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: hantarx 25 black line
« Reply #3 on: March 16, 2008, 12:42:56 pm »
if you connect a standard jamma game it will work,
the monitor is still recieving the wrong frequency which why you have two pictures
i am not familiar with the soft 15khz stuff but i can see its not a sync wiring problem as if it were your picture would be rolling or just a mess
i would say you need to check the soft 15k/vga card set up again just to make sure everything is set correct
perhaps it would be better to repost this as question regarding your particular graphic card and setting with soft 15khz
sorry i can't help more but this is a different area to what i am used to
good luck

john_abey

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:September 07, 2011, 03:51:12 pm
Re: hantarx 25 black line
« Reply #4 on: March 18, 2008, 11:51:37 am »
thanks for all the help

problem solved
new drivers from nvidia version 90  installed reboot   fit screen perfect no adjustment at all

 :applaud: :laugh2: :cheers: