Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Applying CP artwork with flush mounted trackball plate  (Read 1421 times)

0 Members and 1 Guest are viewing this topic.

Nataq

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 189
  • Last login:October 21, 2023, 09:09:45 am
  • Arcade of the dead... now alive!
    • Arcade of the dead... now alive!
Applying CP artwork with flush mounted trackball plate
« on: October 19, 2007, 10:17:36 am »
Ok I did search the forum for 20 minutes and didnt find what I wanted so here is my question :

How do you apply your artwork if you have a flush mounted trackball with the mounting plate ?

I guess you cut the trackball hole first in the artwork, install the mounting plate with the trackball then apply artwork ? (and go on cutting button holes, installing them etc...)

Also... any problem sticking the artwork on the trackball mounting plate ? I mean any deformation of some sort of the artwork there ?

Thank you !

Nataq

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 189
  • Last login:October 21, 2023, 09:09:45 am
  • Arcade of the dead... now alive!
    • Arcade of the dead... now alive!
Re: Applying CP artwork with flush mounted trackball plate
« Reply #1 on: October 26, 2007, 03:57:12 pm »
K... i guess I answered myself. Thanks guys  ;)