Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: arcadevga and daphne ?  (Read 1569 times)

0 Members and 1 Guest are viewing this topic.

squizz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 52
  • Last login:May 20, 2005, 05:32:41 am
  • I want my own arcade controls!
arcadevga and daphne ?
« on: May 01, 2003, 12:12:55 pm »
 Sorry if this was posted --BINGO! Either that, or I was attempting to say "before" but it was too many letters to type--, did look into history but was'nt sure now if it work's fine or not on a WG-D9200 monitor with the arcadevga card ?


  also has anyone tried this card with pj64 also ?

 thanks


edit - sorry forgot to place topic into message :(
   
 also wanted to know if daphne now runs fine with a wg-d9200 and an arcadevga video card.....  ( anyone tried these two now ? )

 thanks
« Last Edit: May 02, 2003, 09:45:24 am by squizz »

shmokes

  • Just think of all the suffering in this world that could have been avoided had I just been a little better informed. :)
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10397
  • Last login:September 24, 2016, 06:50:42 pm
  • Don't tread on me.
    • Jake Moses
Re:arcadevga and daphne ?
« Reply #1 on: May 01, 2003, 01:55:21 pm »
The WG9200 will work fine with the Arcadevga, but it defeats the purpose of the arcadevga at the same time.  One of the things that makes the WG9200 so popular around here is that it accepts a standard VGA signal from ANY videocard like a regular computer monitor.  So you CAN use an arcadevga, but don't go out of your way for it.
Check out my website for in-depth reviews of children's books, games, and educational apps for the iPad:

Best Kid iPad Apps

squizz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 52
  • Last login:May 20, 2005, 05:32:41 am
  • I want my own arcade controls!
Re:arcadevga and daphne ?
« Reply #2 on: May 04, 2003, 06:15:20 am »
 So does daphne work with the arcadevga card now ?
 or is there still problems with the 2.
 
  thanks

DeathMonk

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 362
  • Last login:April 03, 2015, 02:01:12 pm
    • MameStation.3
Re:arcadevga and daphne ?
« Reply #3 on: May 05, 2003, 10:46:47 am »

The WG9200 will work fine with the Arcadevga, but it defeats the purpose of the arcadevga at the same time.  One of the things that makes the WG9200 so popular around here is that it accepts a standard VGA signal from ANY videocard like a regular computer monitor.  So you CAN use an arcadevga, but don't go out of your way for it.


No, it does not defeat the purpose.  The D9200 supports 15, 25, and 31Khz signals--wouldn't it defeat the purpose of the monitor by using only a 31Khz card?  Remember, Andy's card now supports 31Khz AND 15Khz..  


Now with cup beer holders!