Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: xmame running too fast  (Read 1411 times)

0 Members and 1 Guest are viewing this topic.

captbaritone

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 23
  • Last login:December 25, 2007, 01:54:05 pm
    • ClassicalCode
xmame running too fast
« on: August 07, 2007, 07:24:39 pm »
Even though I have throttle turned on, xmame seems to be running a bit too fast. When I turn on the feature that tells you (in the upper right hand corner of the screen) how many FPS you are running at, it gives a number and then says its running at 100%.

This problem is most noticeable in games like Arkanoid. (I can only hit the ball one time, if I am lucky, and I am not that bad).

Any ideas?

-Captbaritone

KDOG

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 350
  • Last login:September 18, 2020, 03:08:26 pm
Re: xmame running too fast
« Reply #1 on: August 07, 2007, 10:12:47 pm »
Is the paddle moving to fast or the ball? If it is the paddle you can turn down the sensitivity in mame. Also what are you using mouse or spinner?

captbaritone

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 23
  • Last login:December 25, 2007, 01:54:05 pm
    • ClassicalCode
Re: xmame running too fast
« Reply #2 on: August 07, 2007, 10:39:24 pm »
I had not thought of the fact that perhaps the controler was too sensitive. I also did not realize (as I do now) that Arkanoid is intended to be played with a spinner. This could definatly explain why Arkanoid is so hard. However, it seems like other games are running fast too, but its really hard to tell. Is there anyway to check to make sure a game is running at the correct speed?

KDOG

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 350
  • Last login:September 18, 2020, 03:08:26 pm
Re: xmame running too fast
« Reply #3 on: August 07, 2007, 11:03:51 pm »
I think they changed the way frame rate is displayed. It use to show the fps (60/60) now it shows percent so I am not too sure