Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: namco geebee b/W monitor eht problem  (Read 1616 times)

0 Members and 1 Guest are viewing this topic.

robotype

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 33
  • Last login:November 23, 2012, 05:54:42 pm
namco geebee b/W monitor eht problem
« on: July 16, 2007, 10:27:29 am »
yesterday the monitor of my geebee died, I heard a noise and found the yoke connector on the high voltage pcb was burnt and smell of blown capacitor. before doing that the image on the screen was extremely unstable. actually that pcb is in quite bad shape as you can see from the picture below...what could be the cause of this?

http://img524.imageshack.us/img524/6634/ehtgeebeepm6.jpg



grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: namco geebee b/W monitor eht problem
« Reply #1 on: July 16, 2007, 04:05:26 pm »
you never know your luck,replace the anode cap and the transistor,clean and re-tin the edge connector and check its opposing socket.re-glue the bit of plastic on the flyback
if your really lucky it might work

robotype

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 33
  • Last login:November 23, 2012, 05:54:42 pm
Re: namco geebee b/W monitor eht problem
« Reply #2 on: September 12, 2008, 09:03:52 am »
works now, thanks!