Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: K7000 Flyback Picture  (Read 1568 times)

0 Members and 1 Guest are viewing this topic.

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
K7000 Flyback Picture
« on: June 18, 2007, 12:11:32 pm »
I bought a lot of flybacks on eBay.  They were supposed to be all K7000 flybacks.

The first one I pulled out didn't look like one, so I checked it's numbers.  It's actually a flyback for a K7400.

The other two appear identical, but there are no numbers on them at all.  Can someone post a close-up picture of a K7000 flyback for me?

D_Zoot

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 402
  • Last login:November 18, 2010, 03:59:37 pm
  • Sorry if I get any spit on you...
Re: K7000 Flyback Picture
« Reply #1 on: June 18, 2007, 08:00:23 pm »
Peale,

Crappy phone pics,  don't have my camera with me at the shop.   

The problem with K7000 fly's is there appears to be several variations on them.  The one in the pics is the standard aftermarket K7000 fly I use.   As I dig through the stash of chassis, I noted there are several that are slightly different in appearance, might make ID'ing those tough.

Two identical chassis on my bench, one has a fly with the focus wire out the top, one with the focus wire out the bottom.


D

Crowquill

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 920
  • Last login:November 21, 2024, 09:42:17 am
  • Scratch-built Guitar - Under Construction!
Re: K7000 Flyback Picture
« Reply #2 on: June 21, 2007, 06:26:47 am »
The problem with K7000 fly's is there appears to be several variations on them.  The one in the pics is the standard aftermarket K7000 fly I use.   As I dig through the stash of chassis, I noted there are several that are slightly different in appearance, might make ID'ing those tough.

Two identical chassis on my bench, one has a fly with the focus wire out the top, one with the focus wire out the bottom.

Not to mention the Zenith version that has a different flyback altogether.
Brevity is not my strong suit.