Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Will a Cap kit fix my arcade monitor??  (Read 3810 times)

0 Members and 1 Guest are viewing this topic.

eclypse

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 51
  • Last login:September 03, 2007, 11:43:10 am
Will a Cap kit fix my arcade monitor??
« on: May 15, 2007, 01:36:54 am »
Hey guys,

The cab i recently bought has an old Zenith 25" monitor.. Its from Wells Gardner..

The model number off the chassis is 25K7191.

The prob with the picture is that its overall dull.. The colors are all there its just not very bright. The whites looks yellow/redish. I can see a few jail bars and some jiddering or flickering at times.. Other then that it looks good. I cant see any burn in. Though it just might not be bright enough yet to see it hehe.

I've tried messing with the contrast and black level pots and its either over bright or dull.

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Will a Cap kit fix my arcade monitor??
« Reply #1 on: May 15, 2007, 09:35:36 am »
Sounds like a tube that needs rejuvinating.  Though at this age a cap kit couldn't hurt.

eclypse

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 51
  • Last login:September 03, 2007, 11:43:10 am
Re: Will a Cap kit fix my arcade monitor??
« Reply #2 on: May 15, 2007, 12:03:50 pm »
Is that hard to do? Is there anything i have to buy to do it? I'm gona buy a cap kit today and would like to grab up all the other parts i may need at the same time.

I was planing on buying a new monitor but funds are tight atm so if i could get some use out of this monitor for a while it would be nice.


SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Will a Cap kit fix my arcade monitor??
« Reply #3 on: May 15, 2007, 12:55:17 pm »
You'd need a rejuvinator to do it.  Either find a TV shop or maybe someone here on the forums close to you can help.

eclypse

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 51
  • Last login:September 03, 2007, 11:43:10 am
Re: Will a Cap kit fix my arcade monitor??
« Reply #4 on: May 15, 2007, 01:12:30 pm »
Thanks for the info.. So would a tv repair shop charge alot to do this?

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Will a Cap kit fix my arcade monitor??
« Reply #5 on: May 15, 2007, 02:13:01 pm »
I suppose it would depend on the shop.  A lot of shops these days likely don't even know what one is.  :(

Where are you located?

eclypse

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 51
  • Last login:September 03, 2007, 11:43:10 am
Re: Will a Cap kit fix my arcade monitor??
« Reply #6 on: May 15, 2007, 02:37:13 pm »
I'm in Macomb MI USA.

eclypse

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 51
  • Last login:September 03, 2007, 11:43:10 am
Re: Will a Cap kit fix my arcade monitor??
« Reply #7 on: May 15, 2007, 04:26:41 pm »
hmm.. Now i have someone else telling me not to and just try the cap fix first.. as it will stress the monitor and you dont want to do it unless you really need it.

heh.. Well someone tell me if a Benson 27" monitor will fit in a former Killer Instink 2 cab? Its 26 3/4" wide.



I'd rather not waste anymore money and time on this and just rather start moving on getting a new monitor since this is the one i wanted to buy for it orginally as its gona be a MAME cab.
« Last Edit: May 15, 2007, 04:31:14 pm by eclypse »

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 16, 2025, 06:33:55 pm
Re: Will a Cap kit fix my arcade monitor??
« Reply #8 on: May 15, 2007, 05:19:27 pm »
a cap kit is gonna be a few dollars mate and a little time,you also have colour adjustments on the neck card,i don't call that throwing money away

eclypse

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 51
  • Last login:September 03, 2007, 11:43:10 am
Re: Will a Cap kit fix my arcade monitor??
« Reply #9 on: May 15, 2007, 05:27:58 pm »
I have a guy waitin for me to fix the monitor so i can test it with the only game i have that he already paid for. Held him up already for a week now.

If i spend another $15 and a week to receive it and another day or 2 to fix it.. i think thats a little too much to ask the buyer of the game board.

Hell i'm gona replace it anyways.. eventually. I was only hoping to straighten out this monitor so i could possably sell it insted of trash it.