Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: 25" tri sync?  (Read 1485 times)

0 Members and 1 Guest are viewing this topic.

scurvy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 71
  • Last login:July 23, 2008, 11:31:43 pm
25" tri sync?
« on: May 05, 2007, 07:50:47 pm »
does anyone make one?

i need a monitor to go in a ms. pac man cabinet and its measures the same width as the 27" betson so i dont think it will fit.

looking for a 25" tri sync
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: 25" tri sync?
« Reply #1 on: May 05, 2007, 08:09:03 pm »
25" has been replaced with 24.8"

Nieman Displays has 24.8" tri-sync.

A Ms.pac cabinet was supplied with a 19" monitor.
Logged

scurvy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 71
  • Last login:July 23, 2008, 11:31:43 pm
Re: 25" tri sync?
« Reply #2 on: May 05, 2007, 08:30:01 pm »
is neiman the only one that carries that size?
do you know how much it goes for?

should fit in the ms pac man
« Last Edit: May 06, 2007, 12:31:43 am by scurvy »
Logged

Rickn

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 478
  • Last login:May 08, 2020, 01:32:28 pm
Re: 25" tri sync?
« Reply #3 on: May 06, 2007, 10:09:24 am »
You Can get the dimensions you need from our website www.niemandisplays.com go to our products, then CRT products then click the dimension box.

You could reduce the depth by about an inch by cutting the vertical brackets if needed?

Rick Nieman
Rick@Niemandisplays.com
Logged
Always happy to help.., for the best in displays
Rick Nieman
Rick@Niemandisplays.com
www.niemandisplays.com
1023 Rife Rd Cambridge, Ontario Canada N1R5S3
519-621-1722
Pages: [1]
  
Go Up
« previous next »