Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: chassis number  (Read 1549 times)

0 Members and 1 Guest are viewing this topic.

chris79

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:September 07, 2007, 03:25:14 pm
chassis number
« on: May 03, 2007, 02:32:39 pm »
if you find the chassis number on your monitor, will that tell you what kind of monitor you have?  I used to think mine was a Electrohome, but I seen a chassis number on the back that has a WG then some numbers so i'm not sure now.
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: chassis number
« Reply #1 on: May 03, 2007, 06:21:18 pm »
I suggest you read this first:

http://forum.arcadecontrols.com/index.php?topic=62016.0

Then visiting the monitor id sites to see what you have.
Logged

modessitt

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 402
  • Last login:October 17, 2021, 07:02:28 pm
  • Technician
Re: chassis number
« Reply #2 on: May 03, 2007, 10:51:33 pm »
Quote from: chris79 on May 03, 2007, 02:32:39 pm
if you find the chassis number on your monitor, will that tell you what kind of monitor you have?  I used to think mine was a Electrohome, but I seen a chassis number on the back that has a WG then some numbers so i'm not sure now.

I recently pulled a Nanao MS8-26SU out of a Golden Tee and it had a WGxxxxxx sticker on one of the metal sides.  Looked like it was factory applied, unless someone put a lot of glue on the back of one and stuck it on the chassis.  Did WG use a Nanao supplier at any point?  Or was this something done by someone sometime to maybe pass it off as a WG?
Logged
Working Games:Joust CT,Gyruss UR,Pong,Battlezone UR#1
Current Proj's:Battlezone UR#2
Cheap/Free Cabs Wanted: DK,KarateChamp,Shinobi,Ghosts&Goblins,CircusCharlie,10ydFight,PolePositnCP,RallyX,Frogger
Pages: [1]
  
Go Up
« previous next »