WTB Wico Dustwashers

[Timoe]

I need a couple of Wico dustwashers or blank dustwasher material and I can drill my own.

[rockin_rick]

You may be wanting a better deal than this, but these are only $2.00... ea.

http://www.mikesarcade.com/cgi-bin/store.pl?sku=JOYGUARDW

I would be interested in a source for blank dustwasher material to make your own....

Hope this helps,
Rick

[NiteWalker]

Maybe 1/16" ABS textured plastic? That's what it looks like to me. I've also seen people make them out of clear acrylic.

[Timoe]

Maybe 1/16" ABS textured plastic? That's what it looks like to me. I've also seen people make them out of clear acrylic.

Nitewalker,

Any ideas where I can pick that up?

[NiteWalker]

Here's some 3/32" and here's tap plastic's page on ABS sheets. There doesn't seem to be 1/16" available but there is 1/32".

[rockin_rick]

That's pretty cool.  You could make a bunch with that...  And if you were to go dust washer under the CPO, then you don't even need to make the outside of it perfectly round...  Although a hole saw may make it easy to get nice and round...

Rick