Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Neckboards  (Read 1237 times)

0 Members and 1 Guest are viewing this topic.

markt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 123
  • Last login:May 08, 2010, 07:48:50 pm
Neckboards
« on: April 07, 2007, 02:26:16 pm »
Where is a good place to get replacement neckboards?
I aquired a hantarex mtc 9000 with a broken neckboard.
I don't know if the monitor is any good but until I replace that board I cant test it.

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: Neckboards
« Reply #1 on: April 07, 2007, 02:57:05 pm »
if you're in the u.k you could try any number of machine operators or arcades,all the ones i worked for in the u.k had old chassis hanging around for use as spares otherwise you could contact hantarex in the u.k to see if they have any old neck cards hanging around
you could always try bridging up the broken neck card,i've done that before with good success