Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: WG 19K4952: Wiring to VGA cable  (Read 1950 times)

0 Members and 1 Guest are viewing this topic.

Cfour

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:March 27, 2013, 05:34:53 pm
WG 19K4952: Wiring to VGA cable
« on: March 21, 2007, 09:44:42 pm »
Using this web site as a guide, http://dragonsden.emuunlim.com/pinout.jpg , I am wiring my VGA exender cable.  However, not only does my monitor NOT have a second molex connector (not really conerned about that - saw other similar posts on the forum), it appears to be missing the POS H Sync cable on the first molex connector. 

Here is a picture:
http://www.sternie.com/img122.jpg

It is a bit blurry, but you can see the missing cable.  Is this an issue?  I have not tried to do the wiring yet as I figured I should check here first.

The game did work and display fine (WWF Superstars) prior to gutting the cab.
Logged

flashdog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 29
  • Last login:February 18, 2012, 06:10:58 pm
Re: WG 19K4952: Wiring to VGA cable
« Reply #1 on: March 25, 2007, 01:33:18 am »
Looks like its their, just no wire on it? It's just a bit more than blurry. Got a better pic?
Logged

Cfour

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:March 27, 2013, 05:34:53 pm
Re: WG 19K4952: Wiring to VGA cable
« Reply #2 on: March 25, 2007, 04:52:49 pm »
Right, the "hole" for it is there, but no wire.  I have not tried to wire this up yet, i might tonight yet.  Sorry, no better pic but what you said is dead on.

Logged

northerngames

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2927
  • Last login:April 09, 2016, 04:18:51 pm
Re: WG 19K4952: Wiring to VGA cable
« Reply #3 on: March 26, 2007, 10:01:22 am »
yup just solder a wire in and that spot and yo should have the H and V signals again.
Logged
Pages: [1]
  
Go Up
« previous next »