Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: WANTED: Sanyo 20EZ Inverter Board  (Read 2215 times)

0 Members and 2 Guests are viewing this topic.

FrizzleFried

  • no one listens to me anyway.
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5159
  • Last login:November 07, 2025, 04:36:07 pm
    • Idaho Garagecade
WANTED: Sanyo 20EZ Inverter Board
« on: March 19, 2007, 12:40:46 am »
I am looking for a working Sanyo 20EZ inverter board.  If you have one or you know where i can buy one,  please let me know!

Thanks!

Logged
Visit my arcade blog at: www.idahogaragecade.com (Updated 10-28-21)

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7787
  • Last login:April 02, 2026, 06:41:42 pm
  • Worthless button pusher!
Re: WANTED: Sanyo 20EZ Inverter Board
« Reply #1 on: March 19, 2007, 06:58:41 am »
I think ArcadeShop had them.
Logged
Working: Not Enough
Projects: Too Many
Progress: None

FrizzleFried

  • no one listens to me anyway.
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5159
  • Last login:November 07, 2025, 04:36:07 pm
    • Idaho Garagecade
Re: WANTED: Sanyo 20EZ Inverter Board
« Reply #2 on: March 19, 2007, 09:15:07 am »
Cheffo,

I have dropped them an email,  however,  the one I see on their site is a board that allows Nintendo games to be played on standard (Electrohome, WG, etc) monitors.  I will be running a JAMMA board on a Sanyo 20EZ monitor.

Logged
Visit my arcade blog at: www.idahogaragecade.com (Updated 10-28-21)

FrizzleFried

  • no one listens to me anyway.
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5159
  • Last login:November 07, 2025, 04:36:07 pm
    • Idaho Garagecade
Re: WANTED: Sanyo 20EZ Inverter Board
« Reply #3 on: March 19, 2007, 07:58:48 pm »
All I can tell  you is that I have a DK Jr board WITHOUT the inverter board and it runs perfectly fine in the Sanyo 20EZ hooked directly to the chassis.  I was told that I would need the inverter board if I wanted to run a JAMMA board in the cabinet.  I have read that the Sanyo 20EZ is modified to run inverted for the DKJR and DK boards and that an Inverter Board is necessary to run non-inverted boards....

To be clear we are talking about negitive colors, etc...not rotation.  The person at Mikes arcade I have been communicating with keeps talking about rotation and is confusing the hell out of me.

If the DKJR plugs right in to the chassis and works fine (all stock BTW),  that says to me that I am going to need to get the inverter board,  to run this with a JAMMA board... right?

« Last Edit: March 19, 2007, 08:00:54 pm by FrizzleFried »
Logged
Visit my arcade blog at: www.idahogaragecade.com (Updated 10-28-21)

FrizzleFried

  • no one listens to me anyway.
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5159
  • Last login:November 07, 2025, 04:36:07 pm
    • Idaho Garagecade
Re: WANTED: Sanyo 20EZ Inverter Board
« Reply #4 on: March 19, 2007, 11:04:29 pm »
There is a way to modify the chassis with a kit from Zanen...but i'd really like to find the inverter board to keep the compatibility with Nintendo boards just in case...

Logged
Visit my arcade blog at: www.idahogaragecade.com (Updated 10-28-21)

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7787
  • Last login:April 02, 2026, 06:41:42 pm
  • Worthless button pusher!
Re: WANTED: Sanyo 20EZ Inverter Board
« Reply #5 on: March 20, 2007, 07:16:06 am »
IIRC, some of the EZ-20s had the inverter board attached and some didn't.

Cheers
Logged
Working: Not Enough
Projects: Too Many
Progress: None

FrizzleFried

  • no one listens to me anyway.
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5159
  • Last login:November 07, 2025, 04:36:07 pm
    • Idaho Garagecade
Re: WANTED: Sanyo 20EZ Inverter Board
« Reply #6 on: March 20, 2007, 09:49:26 am »
Quote from: CheffoJeffo on March 20, 2007, 07:16:06 am
IIRC, some of the EZ-20s had the inverter board attached and some didn't.

Cheers
Precisely Cheffo...and mine,  unfortunately,  didn't.  Hence my need for one.  A new member has offered to send me one for the price of shipping.  When I get it,  I will be posting a GOOD TRADER post.   So,  for now,  I suppose I am NOT looking for one and hopefully won't be re-looking for one anytime soon!

 :cheers:
Logged
Visit my arcade blog at: www.idahogaragecade.com (Updated 10-28-21)

fredster

  • Grand Prophet of Arcadeology
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2265
  • Last login:February 16, 2019, 04:28:53 pm
  • It's all good!
Re: WANTED: Sanyo 20EZ Inverter Board
« Reply #7 on: March 20, 2007, 09:33:33 pm »
I'll sell a cabinet with one in it for $100.  I'll even throw in the cap kit for it.  The monitor needs about every cap in it replace :)

I have another one in parts if you want it too.

Logged
King of the Flying Monkeys from the Dark Side

modessitt

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 402
  • Last login:October 17, 2021, 07:02:28 pm
  • Technician
Re: WANTED: Sanyo 20EZ Inverter Board
« Reply #8 on: March 21, 2007, 03:37:13 pm »
For those who need this in the future, I'm told that Eldorado Games has them.
Logged
Working Games:Joust CT,Gyruss UR,Pong,Battlezone UR#1
Current Proj's:Battlezone UR#2
Cheap/Free Cabs Wanted: DK,KarateChamp,Shinobi,Ghosts&Goblins,CircusCharlie,10ydFight,PolePositnCP,RallyX,Frogger
Pages: [1]
  
Go Up
« previous next »