Author Topic: Monitor problem with wells gardner 4600 for mr do's castle (Read 1229 times)

rfr341 · « **on:** February 27, 2007, 10:46:05 pm »

Hi, I have a Mr Do's castle with a wells gardner 4600 monitor. When I turn it on the picture is upside down which is no big deal beacause I know how to fix that but no matter how much I try to adjust the monitor the picture has a wave in it. I have included some pictures to show what I mean. I have re-capped the chassis. Any ideas what could be causing this problem? Could the picture tube itself be the problem?

Ken Layton · « **Reply #1 on:** February 28, 2007, 01:11:30 am »

Did you recap the main board on the monitor?

If so then visit www.homearcade.org/BBBB/slanted.html

rfr341 · « **Reply #2 on:** February 28, 2007, 02:08:18 am »

HI Ken, I have re-capped the main board on the monitor.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Monitor problem with wells gardner 4600 for mr do's castle (Read 1229 times)

rfr341

Monitor problem with wells gardner 4600 for mr do's castle

Ken Layton

Re: Monitor problem with wells gardner 4600 for mr do's castle

rfr341

Re: Monitor problem with wells gardner 4600 for mr do's castle