trouble with skateball pinball

[tk1959]

I have a bally skateball piball game. The problem is if you hit both flippers at the same time the game shuts down. I had a pinball service tech in town look at it and he was unable to determine why. I have changed all the flipper coils with new one. Anybody have any ideas what else to check?

[Kevin Mullins]

Sounds like a current draw on the power supply of some sorts.......

Take a look here:
http://www.pinrepair.com/bally/index3.htm#reset

[SirPeale]

Check your bridges first.

Check your power connectors for burnt ones.

This is pinball 101.  Sounds like you need a different tech.

[tk1959]

Thanks Peale and Kevin. Kevin that sight you gave me was great. I will check everything later

[tk1959]

Kevin,
ended up being the capcitor, I replaced it and everything is fine. Thanks

[ChadTower]

You still want to check your connectors for burnt ones.  Those hard crashes kill connectors and burnt connectors eventually kill other things that are much nastier than a dead filter cap.  Any connector that has burn marks on it or around the male headers needs to be replaced.  Not cleaned, replaced entirely, both male and female sides.