Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: T-Molding (Which for 18mm?)  (Read 1174 times)

0 Members and 1 Guest are viewing this topic.

Gizmo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:February 26, 2024, 01:42:18 pm
T-Molding (Which for 18mm?)
« on: January 14, 2007, 02:27:55 pm »
I need t-molding , but i need for 18 milimeters mdf
Which one do i need from t-molding.com?
I can't figure it out (maybe i am stupid, but i don;t inderstand inches ???)

 1/2" T-Molding (0.50")
 9/16" T-Molding (0.56")
 5/8" T-Molding (0.625")
 11/16" T-Molding (0.68")
 3/4" T-Molding (0.75")
 13/16" T-Molding (0.81")
 1" T-Molding
 1.5" T-Molding
 
Logged

Red 5

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 77
  • Last login:January 08, 2021, 10:30:51 am
  • Do something stupid and we will make you famous
Re: T-Molding (Which for 18mm?)
« Reply #1 on: January 14, 2007, 02:32:34 pm »
18mm is = to .7087 inches

3/4" is .7500 inches

Go with the 3/4 and just trim it a bit.

Jon
Logged
I accept CASH, Hostages and Gold Krugerrand

fixedpigs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 627
  • Last login:August 19, 2025, 01:29:35 pm
  • warning: drew can't handle my avatar...
Re: T-Molding (Which for 18mm?)
« Reply #2 on: January 14, 2007, 02:34:00 pm »
well there's 2.54 centimeters in an inch...or 25.4mm...
so...
18 / 25.4 = .7 inches...
Logged

Loki

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 294
  • Last login:August 14, 2012, 08:00:32 am
    • Deathnote
Re: T-Molding (Which for 18mm?)
« Reply #3 on: January 14, 2007, 02:51:28 pm »
Quote
For 18mm MDF you need 11/16". The more common 3/4" is 19mm.

Atleast... that's what it says on this site; http://www.vectrex.nl/mame.html
Don't blame me if it's wrong :P
« Last Edit: January 14, 2007, 02:54:14 pm by Loki »
Logged
Don't eat yellow snow.

Gizmo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:February 26, 2024, 01:42:18 pm
Re: T-Molding (Which for 18mm?)
« Reply #4 on: January 15, 2007, 01:50:30 am »
Thanx for the info.
now i know that it is not exact 18mm.(that's what is also calculated myself)
Logged

MaMeNnO

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 201
  • Last login:August 10, 2025, 04:26:53 pm
Re: T-Molding (Which for 18mm?)
« Reply #5 on: January 15, 2007, 03:29:33 am »
I have used 0.75" T-molding for 18mm wood. I haven't trim it, because it looks much better without a trim. You can only screw up with trimming the T-mold.
It just stick out half a millimeter or so.
Logged

Gizmo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:February 26, 2024, 01:42:18 pm
Re: T-Molding (Which for 18mm?)
« Reply #6 on: January 15, 2007, 01:20:13 pm »
Thanx for the input
I know now what to do
Logged
Pages: [1]
  
Go Up
« previous next »