Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: k7400 problems  (Read 1459 times)

0 Members and 1 Guest are viewing this topic.

fargen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:July 09, 2017, 01:11:56 pm
k7400 problems
« on: September 12, 2006, 09:19:22 pm »
heya, i have two of these chassis with the same problem and it is driving me nuts. The b+ is running around 40 volts and I cant seem to understand why...check the diodes, seem okay...changed the uc3842, changed the pot no help on either...seems to be over in the left back area. I just cant seem to isolate this...anyone had this before? thanx  sbm

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: k7400 problems
« Reply #1 on: September 13, 2006, 01:12:10 am »
Has it been capkitted yet?

fargen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:July 09, 2017, 01:11:56 pm
Re: k7400 problems
« Reply #2 on: September 16, 2006, 05:10:19 pm »
heya, yes fresh cap all the way around. Im not sure where to go from here.