Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: [SOLVED] : Defender monitor problem/WG-4600 issue...  (Read 6010 times)

0 Members and 1 Guest are viewing this topic.

Darth Nuno

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 220
  • Last login:May 08, 2024, 04:26:02 pm
  • Namco is God !
    • Arcade Lifestyle / Dragon's Lair Fans
[SOLVED] : Defender monitor problem/WG-4600 issue...
« on: July 13, 2006, 08:20:44 am »
Hi all,

Regarding my topic about my Defender cab here : http://arcadecontrols.com/arcade.htm

I have a problem with the monitor  :badmood:

I can adjust the horizontal screen position !  >:(

A good part of the picture is missing... the left part of the screen... and I can't adjust it !!!

I suppose I've to adjust it with this :



THere is three pins to use, but when I plug the red wire on each of them, I see no difference...



That red wire goes to 2 pins, than to this coil :



Do you thing that coil is broken ? How can I check it  ?

Thanks for your help  :notworthy:




« Last Edit: August 02, 2006, 04:18:58 pm by Darth Nuno »

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: TECH : Defender monitor problem
« Reply #1 on: July 13, 2006, 08:30:03 am »
Ah, a K4600 with what appears to be original caps.

Likely it needs them.

I don't think the 4600 has a H Pos adjustment.

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: TECH : Defender monitor problem
« Reply #2 on: July 13, 2006, 10:32:55 am »
Yes you have a Wells-Gardner k4600 series and it sure looks like it still has the original capacitors. It needs a capkit for sure!

What you are experiencing is the coarse horizontal frequency control is now out of adjustment. This is what roughly controls the centering horizontally of the picture and if way off will cause a slanted picture. See Bob Roberts' site:

http://homearcade.org/BBBB/slanted.html

The red wire that moves to the different posts the adjust Horiz Centering normally only moves the picture a 1/4" max. If it doesn't move at all then you have dried out capacitors on the monitor.

Darth Nuno

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 220
  • Last login:May 08, 2024, 04:26:02 pm
  • Namco is God !
    • Arcade Lifestyle / Dragon's Lair Fans
Re: TECH : Defender monitor problem
« Reply #3 on: July 13, 2006, 03:48:58 pm »
OK thanks for your fast reply  :)

I'll order a capkit first !


MYX

  • Wiki Master
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 1527
  • Last login:September 18, 2020, 05:00:22 pm
  • Even Jesus loves Donkey Kong!
    • MYX Digital Blog
Re: TECH : Defender monitor problem
« Reply #4 on: July 14, 2006, 09:46:49 am »
Hey Darth,
This is a fun one to cap. (If one can consider cap kits fun). Just make sure you take several pix of where everything came from. There are a lot of parts you have to remove to get to other parts. The 4600 was my first capping experience.
M    Y    X

BLACKOUT  - Finally rewritten - http://blog.myxdigital.com/
Original BLACKOUT thread - http://forum.arcadecontrols.com/index.php?topic=48239.0

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: TECH : Defender monitor problem
« Reply #5 on: July 14, 2006, 09:54:21 am »
To do the job properly and easily, you must take the 4600 monitor out of the machine.

Darth Nuno

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 220
  • Last login:May 08, 2024, 04:26:02 pm
  • Namco is God !
    • Arcade Lifestyle / Dragon's Lair Fans
Re: [SOLVED] : Defender monitor problem/WG-4600 issue...
« Reply #6 on: August 02, 2006, 04:24:27 pm »
Hi there...

new CapKit installed :



By the way, see all the installation in pictures here : http://www.dragonslairfans.com/phpBB2/viewtopic.php?t=131

...problem FIXED  :cheers: :notworthy:

DEFEEEEENNNNNDDDDDEERRRR rullezzzzzzzzz  ;) :D :D :D :



See all the story here : http://www.dragonslairfans.com/phpBB2/viewtopic.php?t=107

Thanks  ;)

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 16, 2025, 06:33:55 pm
Re: [SOLVED] : Defender monitor problem/WG-4600 issue...
« Reply #7 on: August 02, 2006, 04:45:24 pm »
congrats,looks great :applaud: