Wells Gardner K7200 19" Schematics

[CPickler]

Does anyone have the schematics for this monitor.  I bought mine new and it didn't come with schematics or anything to explain which controls on the mainboard do what.  Also I would appreciate it if you could tell me which pins on the molex connector correspond to which VGA outputs.  I am using a VGA breakout cable from Ultimarc and using their ArcadeVGA as well.

Thank you, also, where can I get a 10 pin female molex connector with the clips so I can actually connect my VGA breakout cable to the monitor.

[Kevin Mullins]

What is the exact model number of the one you bought?
They have a few variations of the 7200.

[Ken Layton]

Telephone the parts department (1-800-336-6630 or 708-290-2100) at Wells-Gardner and order part number 069X2848-100 Product Manual 19" K7200 series. That's what Wells calls a service manual. It includes schematics, theory of operation/sequence of events, and parts list.

The 10 pin Molex video/sync input connector is Molex # 09-50-7101 or Wells-Gardner part # S03D0000-000F Signal cable assembly with 10 pin connector. 

[CPickler]

Thank you very much.  For the terminals inside the housing do I need 08-50-0106, or do you recommend a different one?

[Ken Layton]

The Wells part number for the cable assembly includes the pins already crimped to the wires & inserted into the housing----a cable assembly!

[CPickler]

ok, Thank you very much.