Author Topic: Custom pink Multipac (Read 10139 times)

ChadTower · « **on:** June 28, 2006, 04:48:36 pm »

Yeah, I know I'll catch a little flack for this, but when I got into this hobby I promised the wife a pink Ms Pac. She's not an arcade person so this will definitely be close enough.

Friday night I'm going to pick up a Pac project cab. It is already sanded down to the wood. Comes with a bunch of stuff for a pure Pac restoration (NOS CPO, original PCB, repro daughterboard, etc) but I'm going to shelf those things for a future project. The plan for this one is to paint it an as of yet undetermined shade of pink, use a Ms Pac based multipac marquee, some custom similar sideart (probably decal). The CP will have a very close Pac theme, perhaps one or two buttons. The guts will be MAME, multipac gameset, and probably a limited number of other 4 way vertical games. The joystick will be a Suzo inductive already on hand configured for 4 way.

A possible later upgrade to the project is a custom auto 4/8 way switching based on output from software (which is why the Suzo is being used).

Pics will be posted as the project moves on, but it shouldn't take all that long, as this is a high priority project. I want to deliver on this one.

I am awaiting delivery on various T molding samples so that I can color match a paint somewhere between the marquee I'm using and the T molding.

EDIT: Didn't realize this was back online... I really like this marquee and may contact the author to see if I may use it.

SirPeale · « **Reply #1 on:** June 28, 2006, 08:30:51 pm »

Why don't you get one of those conversion kits to convert a regular four-way joystick to the Pac-Man joystick bolt pattern? Tornado Terry has them.

ChadTower · « **Reply #2 on:** June 28, 2006, 09:17:11 pm »

Hrm... I'd like to use the Suzo specifically for a couple reasons. One of which is that I owe Retroblast a review of it.

SirPeale · « **Reply #3 on:** June 28, 2006, 09:32:34 pm »

Hm...you may be able to use the Suzo and the mounting plate together.

ChadTower · « **Reply #4 on:** June 29, 2006, 02:48:29 pm »

A couple of questions:

Are the Pac and Ms Pac cabinets the same, or are the dimensions slightly different?

On either/or, is the sideart different on either side or simple mirrors of each other?

I'm looking at the Ms Pac sideart and I think the best way to do this, to keep it "natural" and to satisfy my wife's requirements, may be just to take traditional Ms Pac sideart/front art and invert the blue and pink. That keeps it pretty close to original but also makes it the nice pink Ms Pac the wife wants.

And of course, the cab dimension issue affects printing, were I to go with printed art instead of stencils.

Anyone know of a good source for Ms Pac stencils?

CheffoJeffo · « **Reply #5 on:** June 29, 2006, 04:16:37 pm »

Quote from: ChadTower on June 29, 2006, 02:48:29 pm

Are the Pac and Ms Pac cabinets the same, or are the dimensions slightly different?

Different. Pac is like Galaxian. MsPac is like Galaga.

Quote from: ChadTower on June 29, 2006, 02:48:29 pm

Anyone know of a good source for Ms Pac stencils?

There has been a conversation here (which you have apparently seen):

http://forum.arcadecontrols.com/index.php?topic=50429.0

and on CGCC:

http://www.cgcc.ca/forum/viewtopic.php?t=9678

eccs19 (from the CGCC thread) hangs out here as well.

Cheers.

ChadTower · « **Reply #6 on:** June 29, 2006, 04:19:23 pm »

Yeah, just found all of that this afternoon. Thanks for the pointers. The exact cab dimensions only matter for printed vinyl... if I go with paint, which I would much prefer to do, then the minor differences aren't all that relevant.

ChadTower · « **Reply #7 on:** July 06, 2006, 03:59:09 pm »

Ordered T molding samples in three blues from tmolding.com and pink from dreamarcades. The blues have arrived and the pink should be here shortly.

I have to have the marquee printed, and once that happens, we can color match based on a combo of what the marquee looks like and what T molding combo works best.

ChadTower · « **Reply #8 on:** July 06, 2006, 04:35:29 pm »

Okay, strike one, Mamemarquees.com won't print it.

Raven.. · « **Reply #9 on:** July 06, 2006, 11:37:36 pm »

Have it printed at Kinkos. As fas as the sideart, you should still be able to download the 20th reunion sideart for Ms Pac. If not, I have it and can shoot it to you.

ChadTower · « **Reply #10 on:** July 07, 2006, 07:34:05 am »

Did see that... if I don't go with the stencils, the 20th may be what I use.

cdbrown · « **Reply #11 on:** July 07, 2006, 10:39:10 am »

Why won't they print it?

ChadTower · « **Reply #12 on:** July 07, 2006, 10:47:40 am »

Copyright issues.

ChadTower · « **Reply #13 on:** July 07, 2006, 03:15:52 pm »

Hrm... looking at the stick, it is probably best replaced. I am tempted to replace it with one of these just because I love LEDs so much.

Havok · « **Reply #14 on:** July 07, 2006, 04:05:52 pm »

Quote from: ChadTower on July 07, 2006, 10:47:40 am

Copyright issues.

Uhhh, then what's up with this?

Marquee

ChadTower · « **Reply #15 on:** July 07, 2006, 04:26:25 pm »

No idea. My request for a quote to print the marquee was denied saying they would not print it due to copyright restrictions. Anything further than that you'd have to ask them.

Havok · « **Reply #16 on:** July 07, 2006, 05:31:25 pm »

Hypocritical Daises!

Somebody here said they had a similar issue with another website, and then tried http://www.zazzle.com/ - he just had to say he had the original, and they printed it for him. Maybe try them?

Kangum · « **Reply #17 on:** July 07, 2006, 05:36:44 pm »

midway has been extremely agressive twards pacman and mspacman art. many sites that were selling reproduction art was taken down and or warned with legal action.

the only pacman art you see legally sold is licensed from midway now.

if you try and have a local company print your stuff ive read around that you need to tell them no margins or it will not be properly sized.

ChadTower · « **Reply #18 on:** July 07, 2006, 10:41:18 pm »

Quote from: Havok on July 07, 2006, 05:31:25 pm

Hypocritical Daises!

Eh, mamemarquees does a lot of good work for folks in this community. They do have the right to refuse an order if they want. No big deal.

ChadTower · « **Reply #19 on:** July 13, 2006, 05:59:29 pm »

Still trying to hunt down stencils and brought the monitor over to a friend of mine to be shopped to niceness. Surprisingly, it worked already, just needed some cracked joints redone.

tommy · « **Reply #20 on:** July 14, 2006, 03:51:23 am »

I always knew you were a pink kinda guy. I wish i could say i was surprised but i knew it all along.. good job hiding it with the wife excuses there buddy.

Good luck and have fun anyway, i wont tell anyone.

I do have a ms pac marquee if you need one, it has some fade in the center where the bulb was on though.

ChadTower · « **Reply #21 on:** July 14, 2006, 02:44:24 pm »

Hrm... I'll definitely keep that in mind if I have too much trouble getting the marquee printed that I want to use. How much does a decent Ms Pac marquee go for, anyway?

KSKID · « **Reply #22 on:** July 14, 2006, 04:08:15 pm »

Quote from: ChadTower on July 14, 2006, 02:44:24 pm

Hrm... I'll definitely keep that in mind if I have too much trouble getting the marquee printed that I want to use. How much does a decent Ms Pac marquee go for, anyway?

$30.00 to $35.00

ChadTower · « **Reply #23 on:** July 20, 2006, 04:11:09 pm »

Hrm... so, since the CP came unpopulated, I'm going to have to get the stick and buttons. I like the concept of lit buttons with the color matching the pink sideart base color. Maybe the RGB-Drive is the way to go there... though I am not sure yet if I would also need the LED Wiz for that... or if there is a simpler solution I'm not familiar with yet.

2600 · « **Reply #24 on:** July 20, 2006, 04:26:46 pm »

Depends.

1. What do you want the LEDs to do? i.e. Stay On, blink, fade in or out.
2. What color do you want the buttons? Pink??

ChadTower · « **Reply #25 on:** July 20, 2006, 04:37:39 pm »

Okay, just read this. I totally get it now.

Basically, I want the LED color to match the sideart base. I don't need them to blink or fade or do anything other than light solidly. Well, I should say that cost is a factor here, and I don't want to spend an extra $75 to get blinky lights when there are only going to be a couple of buttons. Ms Pac only has two that are barely used, and MAYBE I'll add a third so I can throw Galaga and a couple others in there.

So, since I'll probably use the Jpac I have sitting here, and run a MAME with only Pacs and a couple of other games... what I can do, IIUC, is run some of these in series, powered by the Jpac itself and installed in the buttons as describe d in the aforementioned link. I assume using the ElectricIce buttons I can play with the resistance until I get a nice matching pink when the button is lit.

2600 · « **Reply #26 on:** July 20, 2006, 08:10:44 pm »

Yeah, just making sure you didn't want anything to blink. JPAC or straight 5VDC should be fine. You'll be running the LEDs in parallel, but don't expect magic trying to match Pink. Just depends how picky you are.

ChadTower · « **Reply #27 on:** July 21, 2006, 03:39:37 pm »

In parallel, eh? I was thinking of doing it in series but then it occurred to me that the first resistor in the chain would pretty much kill the voltage to the rest of them.

So, in parallel, I connect all of them with full lines to the power source? Would it matter if the lines touch each other at the source? Or would I have to make sure they don't?

2600 · « **Reply #28 on:** July 21, 2006, 04:22:48 pm »

Each LED and it's resistor connect to the power and GND.

5V --VVVV---LED---GND

The 5V and GND parts can touch, but not the other part between the resistor and LED. Luckily you only have a few buttons to do.

Now how long before we see pics?

ChadTower · « **Reply #29 on:** July 21, 2006, 04:24:26 pm »

This pic isn't mine, but it is my cab. This is from the website of the guy who sold it to me.

It's not much to look at yet. I'm still waiting on finding usable stencils.

tommy · « **Reply #30 on:** July 21, 2006, 10:52:02 pm »

That thing needs alot of art work to be nice, i hope atleast if you bought that cab with blank spaces it has no wood damage?

I remember posting in the artwork section a long time ago... one of those great art guys sent me a nice ms pac file to work from. I'm sure if you post there one will come up.

ChadTower · « **Reply #31 on:** July 22, 2006, 10:38:10 am »

Actually, there are Ms Pac stencils coming up. It will be a complete repaint. The cab is solid, very good in fact, already sanded down to the wood. I need to fill a couple of small dents and such but it'spretty much good to prime right now. The coin door is already good, the CP is repainted but still has rust showing so I'm going to do it over. Monitor is being shopped by a friend of mine who does that for a living.

The cab itself is blank, but the parts are all here, and none are far from being ready to put right in once the cab is done.

ChadTower · « **Reply #32 on:** July 25, 2006, 08:04:28 am »

Okay, gotta find a plan B. I'd been waiting on the stencils but now that reports are in, looks like a bad bad idea.

ChadTower · « **Reply #33 on:** July 25, 2006, 12:25:19 pm »

Walked past some Ms Pac $20 multigames in Target last night. The cheapass in me was SCREAMING to put that in there.

ChadTower · « **Reply #34 on:** August 03, 2006, 04:37:56 pm »

Found a printer for the marquee. Once I have that in hand I can evaluate its match to the various T molding samples I ordered, then decide on the best color T molding and select a pink oil based enamel for the cabinet.

I talked to the guy at Sherwin Williams I usually get my paint from and he tells me they don't sell oil based paints in their MA stores because new MA regulations forced them to change their oil paints and now they aren't up to normal Sherwin Williams quality. Stupid MA. Then he told me to just drive to RI and get the good stuff. I can do that.

KSKID · « **Reply #35 on:** March 22, 2007, 09:58:23 am »

whatever happened to this project ?

javeryh · « **Reply #36 on:** March 22, 2007, 11:09:28 am »

I'm also curious since I'm building a pink cab too. If you haven't chosen a color yet check out HERE. I'm painting my cabinet using the "Pretty In Pink" color.

ChadTower · « **Reply #37 on:** March 22, 2007, 11:38:44 am »

Put it on hold to wait for the Ms Pac stencils that were mentioned but they never happened. I do have the marquee, looks quite good, but I haven't done the color choosing yet. Too many other higher priority projects on the house. It's been such a pain in the ass trying to find stencils or sideart that I'm probably just going to paint it pink and leave it blank, with just the marquee/bezel/CP having art.

I don't see a Pretty In Pink...?

BTW, I painted parts of my upstairs with Behr paints... never goddam again will I use that brand of paint. You want to talk about subpar results, my god, I had to put 7 coats of yellow over primed trim in order to get it to stop showing through. And that's with bone white primer!

EDIT: Found the color... I'd highly suggest getting the color codes and bringing it to a real paint store.

Stobe · « **Reply #38 on:** March 22, 2007, 10:05:33 pm »

Quote from: ChadTower on March 22, 2007, 11:38:44 am

EDIT: Found the color... I'd highly suggest getting the color codes and bringing it to a real paint store.

That's what I did with my daughter's cab. I had (HD or Lowes? can't remember) color match the disney colors with the Killz latex2 paint. I was happy with it.

-Stobe

javeryh · « **Reply #39 on:** March 22, 2007, 10:40:08 pm »

I'll be putting about 15 coats of lacquer over the paint so I'm not that worried about it holding up. The lacquer will be more than enough...


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Custom pink Multipac (Read 10139 times)

tommy

tommy