Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: color TV is displaying in B/W  (Read 2367 times)

0 Members and 1 Guest are viewing this topic.

tba

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 118
  • Last login:July 21, 2010, 12:27:08 am
  • I want to build my own arcade controls!
color TV is displaying in B/W
« on: June 03, 2006, 11:48:28 pm »
OK, this is weird. i have a cab with a decased 27" TV mounted vertically. everything was working good for the first 3 months...

now for some reason when i turn on the computer the TV starts out in Black and white... no color whatsoever, it displays everything properlay, just no color! after about a minute or two the color suddenly comes back.... works fine from then on.

i have NO idea what is causing this, i have traced every cable and cleaned the connections and made sure they were all seated properly... but i am stumped.

I am a telephone tech, not a monitor tech! ANY help would be appreciated! :banghead:

-TBA-
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: color TV is displaying in B/W
« Reply #1 on: June 04, 2006, 04:11:01 pm »
sounds like something to do with the graphics card
Logged

mccoy178

  • It's hard to work with a straight jacket on
  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3127
  • Last login:September 03, 2021, 10:23:42 am
  • Go Bucks!
Re: color TV is displaying in B/W
« Reply #2 on: June 04, 2006, 05:19:13 pm »
I have also lost color with my radeon 9600 with the s video hookup.  It is really aggravating me. :banghead:
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: color TV is displaying in B/W
« Reply #3 on: June 04, 2006, 06:08:45 pm »
try reloading the drivers
Logged

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: color TV is displaying in B/W
« Reply #4 on: June 04, 2006, 08:08:11 pm »
What's your connection between the vid card and the TV?  My bet is S-Video.
Logged

tba

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 118
  • Last login:July 21, 2010, 12:27:08 am
  • I want to build my own arcade controls!
Re: color TV is displaying in B/W
« Reply #5 on: June 04, 2006, 08:16:20 pm »
yup, it is indeed s-video... hmmm... my first thought was "but this hapens with any TV (i have tried 2 others" duhhh, brain fart. I'll try pulling the ATI 9200 out and put my 3DFX 3500 in and see if it makes any difference!

thanks for the help everyone! :notworthy: sometimes you just need a fresh pair of eyes! :-[
Logged

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: color TV is displaying in B/W
« Reply #6 on: June 04, 2006, 08:35:22 pm »
Actually, try another S-Video cable, if you have one.  They're regretably fragile.
Logged

tba

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 118
  • Last login:July 21, 2010, 12:27:08 am
  • I want to build my own arcade controls!
Re: color TV is displaying in B/W
« Reply #7 on: June 04, 2006, 08:46:02 pm »
i had the same thought, i swapped out the s-video cable and it seems to have taken care of the problem, for now....

i really should start paying more then $1 for them... i would probably get better quality if i did :)
Logged

mccoy178

  • It's hard to work with a straight jacket on
  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3127
  • Last login:September 03, 2021, 10:23:42 am
  • Go Bucks!
Re: color TV is displaying in B/W
« Reply #8 on: June 05, 2006, 12:21:20 am »
I think my problem may very well be a driver issue.  I'll give that a shot.
Logged

tba

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 118
  • Last login:July 21, 2010, 12:27:08 am
  • I want to build my own arcade controls!
Re: color TV is displaying in B/W
« Reply #9 on: June 05, 2006, 12:51:03 am »
well i am not sure that mine is a driver issue, as the bios graphic displays in B/W... and i would assume that there are no drivers running yet.

hopefully the s-video cable swap holds up, so it wont be an issue, but if that fails I'll try new drivers for the card. if all that fails I'll try another card!  :dizzy:
Logged

StephenH

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 544
  • Last login:January 09, 2023, 06:15:45 am
  • I'm a llama!
Re: color TV is displaying in B/W
« Reply #10 on: June 05, 2006, 03:06:22 am »
Just a thought.  Have you used the TV's buttons or its remote, and played with the Color and Tint controls on it.  If the Color control is turned all the way down, it will display in B&W.

Logged

tba

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 118
  • Last login:July 21, 2010, 12:27:08 am
  • I want to build my own arcade controls!
Re: color TV is displaying in B/W
« Reply #11 on: June 05, 2006, 03:17:08 am »
Well i can't speak for others, but... my TV has been decased, the controls are inaccessible without removing the back of the cab, the Ir receiver for the remote is gone... i think it is sitting in a box with a few spare buttons and joysticks :)  and i think the remote was an impromptu dog chew toy. so it is highly unlikely the the controls were messed with...

judging from the other replies that this seems to be a problem with ATI Raideon and their driver and/or an s-video problem.
Logged

mccoy178

  • It's hard to work with a straight jacket on
  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3127
  • Last login:September 03, 2021, 10:23:42 am
  • Go Bucks!
Re: color TV is displaying in B/W
« Reply #12 on: June 05, 2006, 12:27:41 pm »
I had in and out color issues and then one day I plugged in the s video with the computer on and since then it's been black and white. :banghead:  I probably shorted something, but it doesn't seem like that.  It seems like it is something to do with the card.
Logged

tba

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 118
  • Last login:July 21, 2010, 12:27:08 am
  • I want to build my own arcade controls!
Re: color TV is displaying in B/W
« Reply #13 on: June 08, 2006, 08:28:27 pm »
just in case someone is tracking this problem, the cable swap lasted about a week...

i am going to contact ATI Tech support see if they have any ideas.
Logged
Pages: [1]
  
Go Up
« previous next »