Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: My Betson 27" Multisync Just Died - Any Suggestions?  (Read 1356 times)

0 Members and 1 Guest are viewing this topic.

markrvp

  • ARGHHHHHHHHHHHHH!!!!!!!!!! True Genius!
  • Wiki Contributor
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3353
  • Last login:September 14, 2020, 10:19:57 am
  • NFL Expert
My Betson 27" Multisync Just Died - Any Suggestions?
« on: April 03, 2006, 07:25:50 pm »
I have a new Betson 27" Multisync that I got in December for a Golden Tee cabinet I just built.  I bench tested the monitor last night with the Golden Tee board and it worked great.  Before installing it in the cabinet, I wiped some dust from the back of the tube and used canned air to blow off the chassis.  I put it in the cabinet and now it won't power up

NOTHING.  No clicking, no light, no nothing.  I pulled it out of the cabinet and checked the fuse just down from the AC input and it passed a continuity test.

It's dead as a doornell.  It's not doing ANYTHING.  Anybody have any thoughts or ideas or something I can check?

Major Rock Hardy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 261
  • Last login:April 29, 2013, 06:51:45 pm
  • xybots rocks!
Re: My Betson 27" Multisync Just Died - Any Suggestions?
« Reply #1 on: April 04, 2006, 01:01:06 pm »
any indication that you are actually getting power to the monitor?  Power LED?

markrvp

  • ARGHHHHHHHHHHHHH!!!!!!!!!! True Genius!
  • Wiki Contributor
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3353
  • Last login:September 14, 2020, 10:19:57 am
  • NFL Expert
Re: My Betson 27" Multisync Just Died - Any Suggestions?
« Reply #2 on: April 04, 2006, 10:24:48 pm »
any indication that you are actually getting power to the monitor?  Power LED?

None at all.  120v to the chassis power input, but nothing to the monitor.

I have taken it to Betson in Dallas for them to repair.