Author Topic: Randy Fromm DVD's .... See review! (Read 4995 times)

PoDunkMoFo · « **on:** March 29, 2006, 10:44:49 pm »

Hi all,

I did a search on this and it seems several members on these DVDs. My arcade collection is growing and of course several need work. I have an electrical contractors license so I no electrical but my electronics knowledge is very limited. Would this set be worth owning. The ad sounds great but ads are supposed to.

rlemmon · « **Reply #1 on:** March 30, 2006, 02:14:47 am »

Hi PoDunkMoFo. You might want to post a lonk so we can see what your asking about.

KDOG · « **Reply #2 on:** March 30, 2006, 02:46:16 am »

http://randyfromm.com/shopping/

Witchboard · « **Reply #3 on:** March 30, 2006, 08:43:11 am »

I guess it would depend on which DVDs your talking about. I've seen some of the pinball repair DVD and it's pretty much him teaching a class with a camcorder running.

AlexC · « **Reply #4 on:** March 30, 2006, 10:02:44 am »

Quote from: Witchboard on March 30, 2006, 08:43:11 am

I guess it would depend on which DVDs your talking about. I've seen some of the pinball repair DVD and it's pretty much him teaching a class with a camcorder running.

I have the tape set and they are pretty much all like that, but I did learn quite a bit from them. They are cheesy but educational

PoDunkMoFo · « **Reply #5 on:** March 30, 2006, 01:51:57 pm »

Quote from: rlemmon on March 30, 2006, 02:14:47 am

Hi PoDunkMoFo. You might want to post a lonk so we can see what your asking about.

I pretty much figured if you didn't know what I was talking about you couldn't answer my question.

Quote from: Witchboard on March 30, 2006, 08:43:11 am

I guess it would depend on which DVDs your talking about. I've seen some of the pinball repair DVD and it's pretty much him teaching a class with a camcorder running.

Just the arcade stuff especially the electronics, schematics, monitor, and IC related stuff. I was thinking of purchasing the whole set with bluebook, DVD's and CD's.

Quote from: AlexC on March 30, 2006, 10:02:44 am

I have the tape set and they are pretty much all like that, but I did learn quite a bit from them. They are cheesy but educational

So would it be worth the $300+ he is asking?

AlexC · « **Reply #6 on:** March 30, 2006, 05:07:33 pm »

Not sure if they are worth the $300. I could NOT see myself paying $300 for the set, but then again, I'm cheap

and wife would kick my

I bought my VHS set from ebay much cheaper than that.

Q*Bert_OP · « **Reply #7 on:** April 01, 2006, 02:26:46 am »

Quote from: Witchboard on March 30, 2006, 08:43:11 am

I guess it would depend on which DVDs your talking about. I've seen some of the pinball repair DVD and it's pretty much him teaching a class with a camcorder running.

Yes, but there is a -smurf- load of great info mixed in there...

Quote from: PoDunkMoFo on March 30, 2006, 01:51:57 pm

Quote from: Witchboard on March 30, 2006, 08:43:11 am
It's pretty much him teaching a class with a camcorder running.

Quote from: AlexC on March 30, 2006, 10:02:44 am

So would it be worth the $300+ he is asking?

Yes, and you can call him about any technical problem, anytime...

johnvv · « **Reply #8 on:** April 04, 2006, 04:15:11 am »

All the DVD content, manuals, etc. are also available from Randy via his technical support subscription. For $39.95/year, you get access to everything. The videos are in standard podcast formats and the docs are in .pdf.

He just started this about a two months ago. I think it is a very good deal - for novices and pros.

Go to:

http://randyfromm.com/amusements/techdept/

PoDunkMoFo · « **Reply #9 on:** April 05, 2006, 03:20:37 pm »

Quote from: johnvv on April 04, 2006, 04:15:11 am

All the DVD content, manuals, etc. are also available from Randy via his technical support subscription. For $39.95/year, you get access to everything. The videos are in standard podcast formats and the docs are in .pdf.

He just started this about a two months ago. I think it is a very good deal - for novices and pros.

Go to:

http://randyfromm.com/amusements/techdept/

Awesome man. Thanks for the heads up. This will be a great way to see if I think it's worth shelling out the duckets.

dek · « **Reply #10 on:** April 06, 2006, 10:18:19 am »

What is the quality of the video podcast? He should have a sample of what it is he is offering on the site.

johnvv · « **Reply #11 on:** April 06, 2006, 12:21:11 pm »

The quality is good. I'm guessing that all his video sessions were shot on VHS over the years, so they all look fair to good. On the podcasts I've watched, the camera is fixed in the classroom and there are closeups of key parts or actions.

The subscription site is new and Randy mentioned he'd continue to improve it over time. Given the volume of information there and the $39.95 cots, I can't complain about the site features or content. It will take me some time to review and watch it all...

PoDunkMoFo · « **Reply #12 on:** April 06, 2006, 01:24:59 pm »

Well I just subscribed so I will let you guys know what my thoughts are as I check it out. I might possibly even post a review over in that section.

ChadTower · « **Reply #13 on:** April 07, 2006, 09:09:17 am »

I have nearly all of them. The video quality varies but who cares? You're not there to be entertained.

If you are an electrician, you have the base skills to understand everything he talks about, and they are totally worth it. Sounds like that podcast thing is the way to go. That way you can download it all and pop it to DVD on your own.

PoDunkMoFo · « **Reply #14 on:** April 19, 2006, 08:43:48 pm »

O.K.

If you are getting into the hobby of collecting or intend to I suggest you subscribe to the on-line tech thing.

I have learned more in a couple of days about electronics and video game repair than months of searching and lurking.

Everything is broken down so it's easy to understand and you will learn a TON.

I would write a review and post it but the review section is called "Hardware Reviews".

At the price of the subscription a single repair will more than pay for your year.

Randy Rocks.

SirPeale · « **Reply #15 on:** April 19, 2006, 08:47:00 pm »

Quote from: PoDunkMoFo on April 19, 2006, 08:43:48 pm

I would write a review and post it but the review section is called "Hardware Reviews".

Comes on media, right? Is it liquid? No? Post your review.

PoDunkMoFo · « **Reply #16 on:** April 21, 2006, 02:04:02 am »

Quote from: Peale on April 19, 2006, 08:47:00 pm

Quote from: PoDunkMoFo on April 19, 2006, 08:43:48 pm
I would write a review and post it but the review section is called "Hardware Reviews".

Comes on media, right? Is it liquid? No? Post your review.

Done. Bear in mind - I aint got none them thar fancy writin' skills. Take it for what it is worth.

dek · « **Reply #17 on:** April 22, 2006, 05:58:54 pm »

I bought the DVDs off his site almost a week and a half ago, still not here yet. When I emailed him when they would ---steaming pile of meadow muffin--- I got a "2-3 weeks depending if I am in town or not". No mention if he is in town, on his way home, or out of town for whatever amount of time. Not impressed off that alone right now.

Q*Bert_OP · « **Reply #18 on:** April 23, 2006, 11:04:54 pm »

Quote from: dek on April 22, 2006, 05:58:54 pm

I bought the DVDs off his site almost a week and a half ago, still not here yet. When I emailed him when they would ---steaming pile of meadow muffin--- I got a "2-3 weeks depending if I am in town or not". No mention if he is in town, on his way home, or out of town for whatever amount of time. Not impressed off that alone right now.

That dosen't sound like randy...

dek · « **Reply #19 on:** April 24, 2006, 12:24:38 am »

I can forward you the email if you wish.

dek · « **Reply #20 on:** April 24, 2006, 06:20:24 pm »

DVDs arrived today, much sooner than the 2-3 weeks stated. Haven't had a chance to view them yet.

PoDunkMoFo · « **Reply #21 on:** April 26, 2006, 08:20:51 pm »

As I stated in the review I did not purchase the DVD's. I subscribed to the technical site. Everything was very professional and registration was extremely fast. I can't comment one way or the other on anything mailordered but Randy does seem to have his sHite together as far as I can tell.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news