Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: my mk2 monitor only shows red  (Read 1376 times)

0 Members and 1 Guest are viewing this topic.

mvarady

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:May 09, 2007, 10:28:56 pm
  • I want to build my own arcade controls!
my mk2 monitor only shows red
« on: March 04, 2006, 06:45:20 pm »
Scored a free mk2 the other day and the monitor only shows red.The color is way out of wack.I looked for green and blue adjustments and did not find them.need advice.

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: my mk2 monitor only shows red
« Reply #1 on: March 04, 2006, 08:07:44 pm »
1) didn't state the make/model of monitor

2) did you check the connections to make sure everything is plugged in?

mvarady

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:May 09, 2007, 10:28:56 pm
  • I want to build my own arcade controls!
Re: my mk2 monitor only shows red
« Reply #2 on: March 04, 2006, 10:58:25 pm »
25 inch wells-gardner 25k-7197.i can't find any red-green-blue knobs.it's driving me crazy.At first all i saw was rainbow colors on the edges.I degaussed the monitor and the rainbow left.The only colors are red.If a connector is loose,where should i look???Thanks!!!!!!!!!!!!!

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: my mk2 monitor only shows red
« Reply #3 on: March 05, 2006, 04:46:59 pm »
if you have a red screen with diagonal lines going across it then your red drive transistor is short circuit,i think you can find your colour controls on the neck card-but its been a long time since i worked on this type chassis so no doubt someone else on this forum will put me right.you see what you need to prove is
1-is your red transistor driving short
2-are your green and blue not adjusted correctly
3-are your colour inputs from your game board present

mvarady

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:May 09, 2007, 10:28:56 pm
  • I want to build my own arcade controls!
Re: my mk2 monitor only shows red
« Reply #4 on: March 05, 2006, 08:38:14 pm »
No red lines.I can't even find the blue and green color adjusters.further inspection looks like the monitor is a replacement one.Uncovered some dust and found Phillips w22x model.
« Last Edit: March 05, 2006, 10:19:38 pm by mvarady »

Q*Bert_OP

  • Wiki Contributor
  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2089
  • Last login:October 25, 2012, 07:20:42 pm
  • Oh yes, we did!
Re: my mk2 monitor only shows red
« Reply #5 on: March 06, 2006, 10:05:03 pm »
Heater-Cathode short?

Try tapping on the clear glass neck of the tube, very gently, with the handle of a screwdriver, while the monitor is off...
WTB: The Grid by Midway (2001), looking for 2 or more complete games, and large marquee