Author Topic: Antinull's BIG BAD Podium pictures 8/12/8 (Read 22382 times)

nullb0y · « **on:** February 07, 2006, 12:28:09 pm »

i decided i wanted to make a showcase cabinet because my 36" television doesnt get much use

. ive thrown some dimentions together

(im tall so i want the cab to be tall too)

television dimentions
34" wide
30" tall
22" deep

Cabinet dimentions:

36" wide
72" tall
24" deep

shelf in cab
40" from bottom

Front support /cords box compartment
12" wide
4" tall

doors on front (for pc/console access)
(dimentions should leave 2 in clearance for television which is to prevent it being the wrong size lol. anyways id make a bezel out of wood and the front support box iss where the cords would goto the podium/ddr pads

if anyone has any input please let me know

materials, proper support, anything my noob arse might miss

_____ I NEED_______
4 player coin door (thought i had one must have sold it)

bigtimes · « **Reply #1 on:** February 07, 2006, 06:26:41 pm »

All I can offer at this point is this:

I hope you have a lot of time on your hands.

nullb0y · « **Reply #2 on:** February 07, 2006, 07:23:26 pm »

oh deff i have NO life

DrewKaree · « **Reply #3 on:** February 07, 2006, 10:00:36 pm »

nice pics of your progress so far. How'd you get all those dimensions to line up so well in that pic?

I'd suggest you buy wood. All the really sweet cabs seem to have this aspect in common, so I bet you can't skip that.

AtomSmasher · « **Reply #4 on:** February 07, 2006, 11:18:17 pm »

wood is overrated, I think you should make the entire cabinet out of glass

bigtimes · « **Reply #5 on:** February 08, 2006, 01:55:59 am »

The guy who's helping me build my cab suggested we scrap the whole thing and start over in acrylic.

DrewKaree · « **Reply #6 on:** February 08, 2006, 02:09:19 am »

Acrylic PAINT, right? Laying down coats of it on glass to buld up to the thickness you want and then using that? I agree. Use layered acrylic paint if you don't have access to wood. Just remember to use the glass, otherwise the paint is hard to peel off of any other material.

EXCELLENT suggestion - top notch! BRILLIANT!

CheffoJeffo · « **Reply #7 on:** February 08, 2006, 06:51:32 pm »

This question belongs in Board Discussion, but ...

Is there a way I can receive notification anytime that Drew responds to nullboy ?

I'm loving these. Thanks, DK !

Cheers.

AtomSmasher · « **Reply #8 on:** February 08, 2006, 07:13:42 pm »

Quote from: CheffoJeffo on February 08, 2006, 06:51:32 pm

This question belongs in Board Discussion, but ...

Is there a way I can receive notification anytime that Drew responds to nullboy ?

I'm loving these. Thanks, DK !

Cheers.

when posting a reply, click on "additional options" then check the "notify me of replies" box. And I just had a great idea...make the cabinet out of old tires.

CheffoJeffo · « **Reply #9 on:** February 08, 2006, 07:24:08 pm »

Quote from: AtomSmasher on February 08, 2006, 07:13:42 pm

Quote from: CheffoJeffo on February 08, 2006, 06:51:32 pm
This question belongs in Board Discussion, but ...

Is there a way I can receive notification anytime that Drew responds to nullboy ?

I'm loving these. Thanks, DK !

Cheers.
when posting a reply, click on "additional options" then check the "notify me of replies" box. And I just had a great idea...make the cabinet out of old tires.

But I still have to find the thread in the first place ... there have been 3 differrent threads (with DK responding to nullboy) that I know of in recent days and I fully expect nullboy to start others ...

Cheers.

DrewKaree · « **Reply #10 on:** February 08, 2006, 10:33:27 pm »

Quote from: CheffoJeffo on February 08, 2006, 06:51:32 pm

This question belongs in Board Discussion, but ...

Is there a way I can receive notification anytime that Drew responds to nullboy ?

I'm loving these. Thanks, DK !

Cheers.

Go to your profile. Select a different theme. I know for sure that Orangeena gives you a link for "Show new replies to your posts" (although it's gawdawful hideous

I know for certain that there's one other theme that offers that as well that isn't as ugly as sin. Hit the preview to test 'em out and see. Since you've replied here, it'll list this one somewhere on the first page if it's the newest.

Other than that, well....I'm more suited to giving nullboy ideas

nullb0y · « **Reply #11 on:** April 02, 2006, 03:01:52 pm »

lol ok not making a new thread for it ok see? lol anyways
i started my designs for the cabinet and made a cardboard mockup

i also researced mdf a bit and i guess it will hold my 36" up safely if i just brace it properly

here is a picture of where i am so far lol

its prety generic but alot of the ideas i have for this one will hopefuly make it unique

DrewKaree · « **Reply #12 on:** April 02, 2006, 04:02:40 pm »

That looks like that newfangled corrugated MDF. I DEFINITELY like how thin you can make a CP with that stuff, but for whatever reason, your CP controls just leave me...welll.....flat.

I also like the Bender smile on your podium, that certainly IS unique

Not sure if this is safe for the board or not, but I've heard and seen Boonga Boonga and the odd control to play that game and for the life of me, the only thing I can think that "control" you've got on the left of the trackball will be used for is the as-yet-unreleased "Queer Eye For The Boonga Boonga Guy" game they're talking about putting into the next version of MAME.

Excellent start!

nullb0y · « **Reply #13 on:** April 02, 2006, 08:45:51 pm »

hehehe its the "cardboard mock up stage" that i usually do when designing a controll pannel to get a good idea for size and feel without wasting wood. if i lay it out on my computer i wont really get the actual feel for the way it will be layed out. also it showed me that i need to make the controll pannel about a foot taller then the dynamo cabnets have allways good to know ^_^

CheffoJeffo · « **Reply #14 on:** April 02, 2006, 08:52:59 pm »

Quote from: nullb0y on April 02, 2006, 08:45:51 pm

also it showed me that i need to make the controll pannel about a foot taller then the dynamo cabnets have allways good to know ^_^

Interesting ... I'm 6'3" and having a CP "a foot taller than a Dynamo" Showcase would put the controls slightly below my sternum ...

Cheers.

SNAAKE · « **Reply #15 on:** April 02, 2006, 09:17:33 pm »

null cabinets sucks..cuz its always made out of carboard boxes. try building your cabinets with wood or somethin !

nullb0y · « **Reply #16 on:** April 02, 2006, 09:18:40 pm »

erm huh? i have some dynamo showcase designs with measurements my foot taller was off i forgot the controlls are in a box lol so i boosted it with the depth of a box and the wood and got about 6 inches higher i need to be confortable in a chair or standing

hahahaha thanks yah my cardboard crack kills

metaHipster · « **Reply #17 on:** April 04, 2006, 12:51:10 pm »

i like the cardboard CP - looks like some of office furnishings I remember cartman making in an ep of Southpark....

I don't know if the cardboard will be able to support your TV, though, even if you do use braces. May want to consider switching over to a cardboard TV too.

nullb0y · « **Reply #18 on:** April 04, 2006, 09:39:55 pm »

yah mabey lol anyways i bought a sheet of mdf for the control pannel today and as soon as i leave lowes it is a freaking down pour..... hahaha yeah go figure....

nullb0y · « **Reply #19 on:** April 08, 2006, 05:04:16 pm »

i built the extra tall controll pannel base today no sweat
mum let her ---smurfing--- muts out just as ai finished and they pissed alover it
F :censored:ING DOGS I HATE EM!

pictures as soon as im ready to stop being lazy

nullb0y · « **Reply #20 on:** April 09, 2006, 07:27:28 pm »

i finished cutting and putting the controll pannel box together (temp top and the bottom assembly) the bondo is drying right now so ill try to do some sanding tomorow (was lazy and just bondoerated gaps) ill post the rest of the pics soon

Timoe · « **Reply #21 on:** April 09, 2006, 09:00:26 pm »

Thats rough about the dogs. Mine are generally good but sometimes they are unpredictable.

nullb0y · « **Reply #22 on:** April 09, 2006, 09:32:18 pm »

yah anyone know how to remove a urine stain from unpainted mdf? lol i have a feeling im sanding that off and just throwing primer over it lol

Franco · « **Reply #23 on:** April 10, 2006, 04:14:14 am »

Sorry about your misfortune but I skipped right to the bottom of the page and saw your last post, completely cracked me up!

As for removing the stain I cannot help you there, I cant really see It being a common problem amongst us cab builders.

mj147 · « **Reply #24 on:** April 10, 2006, 11:29:02 am »

Quote from: nullb0y on April 09, 2006, 09:32:18 pm

yah anyone know how to remove a urine stain from unpainted mdf? lol i have a feeling im sanding that off and just throwing primer over it lol

Hehe what you haven't seen this infomercial (sp?)

http://www.urinegone.com/?cid=175193

mj147

BobbyG66 · « **Reply #25 on:** April 10, 2006, 12:38:06 pm »

You could cover it up with "Kilz" brand primer.

I use it on knots and such, just never had the chance to use it on urine, blood, spooge, etc....

nullb0y · « **Reply #26 on:** April 10, 2006, 05:07:34 pm »

http://69.14.109.15/rcade.rar
anyways heres an archive of all of the pictures ive taken so far takes to long to load em all on here

i think if i just sand it down and prime over it it should be fine.. as it was a sunny day and it mostly evaporated

oh yeah btw thats the girlfriend in some of those pics...
she helped me build it on our 1 year going out anaversary thingy

CheffoJeffo · « **Reply #27 on:** April 10, 2006, 05:32:51 pm »

You post a link to a 26Mb RAR without mentionning the size ?

Cheers.

EDIT: Liked the embedded 8Mb RAR of house pictures, including dog dishes ...

nullb0y · « **Reply #28 on:** April 10, 2006, 07:42:15 pm »

opsie ::edits file:: its now 18.2 megs.......
i got some sanding on the bondo done today...

NiteWalker · « **Reply #29 on:** April 11, 2006, 11:59:05 am »

You should try photobucket.com.
Very good image hosting.

nullb0y · « **Reply #30 on:** April 11, 2006, 12:22:53 pm »

yah i hosted it like that so if u wantwed pics u could see em but so that this page doesnt take an hour for ppl to load... and i refuse to use photo bucket

NiteWalker · « **Reply #31 on:** April 11, 2006, 01:04:03 pm »

Ah I see. Why the photobucket refusal? Not tryin to push it on or anything but there's an option to do image clickable thumbnails so the only pic that has to load is the thumbnail.

Anyway the cabinet looks good so far. I was actually thinkin about doin one of those and have the control panel detachable with molex connectors and have it sort of as a mame in the cabinet home consoles out of the cabinet sort of thing.

nullb0y · « **Reply #32 on:** April 11, 2006, 02:36:27 pm »

yup thats the plan its all run through svideo im going to get a svideo switch all my systems except ps2 have wireless controllers. so basically itll all work out good i think... my tv has been acting up tho

so im gonna bring it in for repair.... it is really bright and lines are blury now.... to use windows i have to make it extra dark so i can actually read the screen heh...

nullb0y · « **Reply #33 on:** April 11, 2006, 06:17:12 pm »

ok so i posted anouther picture pack....
http://69.14.109.15/rcade2.zip its about 12.7 megs
also heres a pic of me and what ive done so far ^_^

NiteWalker · « **Reply #34 on:** April 11, 2006, 07:10:34 pm »

Nice pics. Must be nice to work outside...
What is the measurement from where your hands rest to the floor?

nullb0y · « **Reply #35 on:** April 11, 2006, 07:44:54 pm »

hmmmm
i dont knooooo
i took it apart (easy 6 screws holding the cp on) so i wouldnt know, I thinks its around 42"
36" podium 4.5 inches of wood sideways and 2 sheets of mdf

oh yeah the urine didnt sink in to deep i sanded a light layer off (eww smelly) and the stain was gone
right now im working on the button layouts
cp is a nice 49"x20"
layout for buttons is
1234
456
(yes i do repeat 4 so neogeo games dont anoy me so much)
also players 3 and 4 only get the top 4 buttons drilled with room for the others later if i decide to emulate thrill kill or something

oh also i wont be able to work outside for a while raining all week and weekend i hear... so yeah ill try to do the layouts and ordering of buttons done this week....

does anyone have a trackball drill/cut template for a 3" trackball?

JLR2000 · « **Reply #36 on:** April 11, 2006, 09:54:43 pm »

I have a 3" template in Visio format, I can shoot it to you if you want....it's what I used for my control panel so I know it's right.

Let me know.

SNAAKE · « **Reply #37 on:** April 11, 2006, 09:58:07 pm »

finally you are building cabinets with WOOD ! looks good so far

nullb0y · « **Reply #38 on:** April 11, 2006, 10:19:17 pm »

lol carboard mockup common ppl lol let it die anyways whats visio? i dont have it whatever it is can u convert it to an actual size jpg?

JLR2000 · « **Reply #39 on:** April 11, 2006, 10:47:17 pm »

Visio: http://en.wikipedia.org/wiki/Microsoft_Visio

I just put the trackball template on a page and printed it to PDF, it's attached here. When you print it make SURE all printing options to stretch or fit to page are off so you get the right size. Hope it helps, I don't know how to convert it to anything else.....

BTW, I didn't create this, got it from here a few years ago.....


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Antinull's BIG BAD Podium *pictures* 8/12/8 (Read 22382 times)

Franco

Author Topic: Antinull's BIG BAD Podium pictures 8/12/8 (Read 22382 times)