Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Qbert Monitor question  (Read 1059 times)

0 Members and 1 Guest are viewing this topic.

mushi99999

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • Last login:April 20, 2011, 08:30:43 pm
  • I want to build my own arcade controls!
Qbert Monitor question
« on: February 07, 2006, 12:13:53 am »
Hey guy's I have a qbert with a wells-gardner 19K4951 what my question is it says it must be connected to an isolation transformer. but I want to connect it to a mame can't I just wire it straight to a power strip?
« Last Edit: February 07, 2006, 12:54:56 am by mushi99999 »
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Qbert Monitor question
« Reply #1 on: February 07, 2006, 02:37:00 am »
Absolutely not!
Logged

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Qbert Monitor question
« Reply #2 on: February 07, 2006, 07:23:27 am »
Even after it tells you it *must* be hooked to an isolation transformer you ask that? 
Logged

mushi99999

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • Last login:April 20, 2011, 08:30:43 pm
  • I want to build my own arcade controls!
Re: Qbert Monitor question
« Reply #3 on: February 07, 2006, 09:46:45 am »
well Yeah. that's why I asked. I didn't know so I thought I'd ask. wasn't sure what the Isolation transformer is for other than isolating it from the main cpu but mabe I'm reading this wrong.
Logged
Pages: [1]
  
Go Up
« previous next »