Author Topic: video amp required for new monitor (Read 1065 times)

skeighter · « **on:** January 18, 2006, 01:11:01 pm »

Just got a new Happs Vision Pro CGA monitor. I had an old Electrohome G07 hooked up to a ArcadeVGA with a video amp in between. My question is whether I can just hook the monitor up to the video amp or do I need to remove it and make a breakout cable? Using the amp would be easiest (only have to connect the wires to the new monitor), but I don't wanna fry anything. The new monitor says it accepts 0 to 2.4 volts on the RGB and the amp is supposed to output at 5 volts. Any help will be greatly appreciated.

dhansen · « **Reply #1 on:** January 31, 2006, 05:45:21 pm »

You shouldn't need the video amp for this monitor. I replaced my Electrohome with a Vision Pro and it was plenty bright without the amp...even through tinted glass.

Doug


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: video amp required for new monitor (Read 1065 times)

skeighter

video amp required for new monitor

dhansen

Re: video amp required for new monitor