Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Dreamcast question  (Read 1400 times)

0 Members and 1 Guest are viewing this topic.

juan_caliente

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:March 08, 2006, 07:00:59 am
  • I want to build my own arcade controls!
Dreamcast question
« on: January 17, 2006, 10:25:52 am »
I built an arcade controler for my dreamcast this weekend to play some MVC2.  My DC came with the composite cable and I wanted the s-video cable.  Feeling cocky from just soldering up the controls I decided to use the pinout on gamesx to add a s-video cable to my DC.  I soldered the two grounds in the cable together and then soldered them to pin 16, ground, then I soldered L and C to their respective pins, 11 and 12 I beleive.  When I turned on the DC, black screen and no sound, rechecked my solder joints and my caps I put in line, I had the caps backwards so reveresed them, I used 10v caps by the way, 220uf and 1uf.  Still nothing so I unsoldered the 3 wires and tried the original cable, nothing there either.  Now I am confused, I might have broken the cable when I took it apart, but I don't think I cross soldered any wires.  Could I have damaged the DC by having the caps hooked up backwards?

Thank you,

John

**Note to self, no more typing till I have a cup of coffee.  :P
« Last Edit: January 17, 2006, 10:41:52 am by juan_caliente »
Logged

versapak

  • Somewhere between a block of wood and a monkey
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1655
  • Last login:October 08, 2024, 04:40:31 am
  • I am t3h GAY!!!
Re: Dreamcast question
« Reply #1 on: January 17, 2006, 10:39:33 am »
Quote from: juan_caliente on January 17, 2006, 10:25:52 am
I built an arcade controler for my dreamcast this weekend to play some MVC2.  My DC came with the composite cable and I wanted the s-video cable.  Feeling cock from just soldering up the controls I decided to use the pinout on gamesx to add a s-video cable to my DC.  I soldered the two grounds in the cable together and then soldered them to pin 16, ground, then I soldered L and C to their respective pins, 11 and 12 I beleive.  When I turned on the DC, black screen and no sound, rechecked my solder joints and my caps I put in line, I had the caps backwards so reveresed them, I used 10v caps by the way, 220uf and 1uf.  Still nothing so I unsoldered the 3 wires and tried the original cable, nothing there either.  Now I am confused, I might have broken the cable when I took it apart, but I don't think I cross soldered any wires.  Could I have damaged the DC by having the caps hooked up backwards?

Thank you,

John


Heh

Maybe this belongs in Everything Else. ;D


Checking the cable itself should be pretty easy. Just use a multimeter to check continuity.

Then if that checks out ok... Well then any advice I give would be out of my bumm, so I will refrain. :)

Logged
Pages: [1]
  
Go Up
« previous next »