Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Another Bezel Question  (Read 1906 times)

0 Members and 1 Guest are viewing this topic.

MikeQ

  • Guest
  • Trade Count: (0)
Another Bezel Question
« on: January 12, 2006, 01:21:44 pm »
Does anyone have a 27" FLAT monitor bezel from Happs?

I'm looking for the outer width and height (The overall width and height).

I've searched the forums but not found any dimensions for the flat, just the curved.

Thanks,

Mike
Logged

Roughy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 258
  • Last login:July 01, 2009, 09:33:20 pm
  • Easily impressed.
    • UserGlue
Re: Another Bezel Question
« Reply #1 on: January 12, 2006, 01:49:38 pm »
Call 'em. I had to do that to get the measurements. 

They'll give you the outside and inside (the opening) measurements.

I have a UAII cab and someone recommended the 19" monitor bezel--it ended up being 25" x 25" and I used my plexi scorer to trim it a little closer to size.  Then grinded it down a little smoother and then life is good.

Just try to find enough stuff from Happs to get your order over $25 or they'll charge you a $10 handling fee for the large--but inexpensive--item, which also sucks.
Logged

farmecologist

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 93
  • Last login:September 28, 2021, 06:41:53 pm
  • I'm not a llama!
Re: Another Bezel Question
« Reply #2 on: January 12, 2006, 01:51:16 pm »
I have one but I don't have it handy right now.
Logged

MikeQ

  • Guest
  • Trade Count: (0)
Re: Another Bezel Question
« Reply #3 on: January 12, 2006, 02:18:53 pm »
I emailed them a few days ago and they came back with measurements that didn't sound right.

I don't have them handy but the outside width was around 25" and the inside width was aroun 21".
Logged

MikeQ

  • Guest
  • Trade Count: (0)
Re: Another Bezel Question
« Reply #4 on: January 12, 2006, 02:20:22 pm »
Quote from: farmecologist on January 12, 2006, 01:51:16 pm
I have one but I don't have it handy right now.
Logged

farmecologist

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 93
  • Last login:September 28, 2021, 06:41:53 pm
  • I'm not a llama!
Re: Another Bezel Question
« Reply #5 on: January 13, 2006, 06:08:37 pm »
Sure, I can do that.
Logged
Pages: [1]
  
Go Up
« previous next »