Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: isolation transformer and monitor cleaning needed  (Read 2191 times)

0 Members and 1 Guest are viewing this topic.

moonpatrol 4 lyfe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 115
  • Last login:May 08, 2011, 04:32:18 pm
  • I want to build my own arcade controls!
isolation transformer and monitor cleaning needed
« on: January 07, 2006, 02:23:38 pm »
I just picked up an Electrhome G07 monitor.  Where can I purchase a good isolation transformer for it?

Additionally, the wires, boards, etc are very dirty.  What is the best method for cleaning them off?

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: isolation transformer and monitor cleaning needed
« Reply #1 on: January 08, 2006, 12:01:23 am »
Arcadeshop.com


To clean use a can of air and a 1" bristled common paint brush to knock the dust & dirt free.

moonpatrol 4 lyfe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 115
  • Last login:May 08, 2011, 04:32:18 pm
  • I want to build my own arcade controls!
Re: isolation transformer and monitor cleaning needed
« Reply #2 on: January 09, 2006, 12:48:13 pm »
I live by canned air.  I was gonna use it, but its powerless against really tough stuck on dust dirt.  Who would have thought to use a paint brush?

Thanks Ken!

Does anyone know where I can get an isolation transformer?

moonpatrol 4 lyfe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 115
  • Last login:May 08, 2011, 04:32:18 pm
  • I want to build my own arcade controls!
Re: isolation transformer and monitor cleaning needed
« Reply #3 on: January 09, 2006, 02:35:10 pm »
Whoops, sorry Ken, I didn't even see your link.

Arcadeshop.com has them for 12.95.  Is this what I need for my monitor?  Any additional wiring or anything needed?

Happs has them too for a few bucks more.  Is happs better or worse?  Are their's compatible.  Any additional wiring or anything required?

moonpatrol 4 lyfe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 115
  • Last login:May 08, 2011, 04:32:18 pm
  • I want to build my own arcade controls!
Re: isolation transformer and monitor cleaning needed
« Reply #4 on: January 10, 2006, 02:04:57 pm »
bump  ;D

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: isolation transformer and monitor cleaning needed
« Reply #5 on: January 11, 2006, 12:58:31 am »
If you already have a game cabinet there should already be an isolation transformer in it.


moonpatrol 4 lyfe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 115
  • Last login:May 08, 2011, 04:32:18 pm
  • I want to build my own arcade controls!
Re: isolation transformer and monitor cleaning needed
« Reply #6 on: January 11, 2006, 11:59:54 pm »
I bought the monitor from a guy who stripped it out of a cabinet.  It didnt come with a transformer, that's why Im trying to find one  ;D

Thanks,
Bill

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: isolation transformer and monitor cleaning needed
« Reply #7 on: January 12, 2006, 02:14:09 am »
So you don't have a game cabinet? What are you going to do with this monitor?

moonpatrol 4 lyfe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 115
  • Last login:May 08, 2011, 04:32:18 pm
  • I want to build my own arcade controls!
Re: isolation transformer and monitor cleaning needed
« Reply #8 on: January 12, 2006, 03:22:43 am »
I have a seperate cab with no isolation transformer in it.  The monitor will go in there.  What transformer should I go with?  Do I need any other parts besides the transformer itself?

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: isolation transformer and monitor cleaning needed
« Reply #9 on: January 12, 2006, 10:25:11 am »
Yeh the isolation transformer at arcadeshop will work fine. You'll need the mating power connector for the Electrohome monitor and Bob Roberts sells that. He sells isolation transformers too. Also on his website is a basic power wiring diagram that just about anybody can follow for hooking up your monitor.

moonpatrol 4 lyfe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 115
  • Last login:May 08, 2011, 04:32:18 pm
  • I want to build my own arcade controls!
Re: isolation transformer and monitor cleaning needed
« Reply #10 on: January 14, 2006, 01:01:16 am »
http://homearcade.org/BBBB/basic-ac.gif

Is this the diagram you are referring to?  Do I need to purchase the fuse, filter, and distribution block on that diagram?

Obviously I will need to purchase the power cord and the power switch, since I doubt the isolation transformer includes that.

If so, this is just great.  The guy I bought it from said, "All you need is an isolation transformer!"  Now it looks like I need to buy a whole power supply.... or just a few components of one.

Thanks again Ken.

-Bill

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: isolation transformer and monitor cleaning needed
« Reply #11 on: January 14, 2006, 02:04:41 am »
To power the monitor you only need the isolation transformer and a power cord.