Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: hantarex polo2 25(resolved)  (Read 1139 times)

0 Members and 1 Guest are viewing this topic.

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:August 16, 2025, 04:42:10 am
hantarex polo2 25(resolved)
« on: December 21, 2005, 04:56:30 pm »
please help,i have a polo2 25 with a width\linearity fault.the picture is bowed at the sides(horizontal) and i think the fault is on the east\west correction board the only other thing i can think of is maybe at some point the chassis has been swapped and the resistors are incorrect to the tube type,any ideas?
« Last Edit: January 05, 2006, 02:17:37 pm by grantspain »
Logged

censei

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 68
  • Last login:November 05, 2009, 11:02:35 pm
  • I want to build my own arcade controls!
Re: hantarex polo2 25
« Reply #1 on: December 22, 2005, 09:31:47 pm »
I believe there is a pin cush trim pot on hantarex monitors. You need to adjust it to straighten the picture.
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:August 16, 2025, 04:42:10 am
Re: hantarex polo2 25
« Reply #2 on: January 03, 2006, 03:43:53 pm »
got it fixed in the end,turned out to be a dry joint on the east/west board and some very poor adjustment.
Logged
Pages: [1]
  
Go Up
« previous next »