Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Capcom Q25 Cabinet  (Read 4268 times)

0 Members and 1 Guest are viewing this topic.

Chainsaw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:May 15, 2022, 10:26:53 am
  • Pac-Men
    • Chainsaw Films
Capcom Q25 Cabinet
« on: November 24, 2005, 04:28:15 pm »
I've updated my webpage with new pics of the Q25. Should be of interest to those who like unusual Japanese cabs, you don't see many of these and I've put a lot of time in to getting this up and going.

http://www.chainsawfilms.com/games/pacmen/arcade.htm

Thanks!

SaiNRuB

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 331
  • Last login:November 26, 2024, 07:30:53 pm
  • Pluck your magic twanger, Froggy!
Re: Capcom Q25 Cabinet
« Reply #1 on: November 26, 2005, 03:42:55 am »
Cool ive never seen one of these.

I love those Q sound speaker grills and the design of the side panels.

Pretty slick looking CPO also, nice job!

Grasshopper

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2380
  • Last login:March 04, 2025, 07:13:36 pm
  • life, don't talk to me about life
Re: Capcom Q25 Cabinet
« Reply #2 on: November 26, 2005, 09:06:37 am »
Very nice indeed. I didn't realise you could pick up those cabs so cheaply in the UK.

Ultimately I prefer the look of old school cabs but I have to admit the modern Japanese cabs are much more practical and comfortable to play on. As I get older the idea of playing games standing up gets less appealing.
"Patriotism is the last refuge of the scoundrel." - Samuel Johnson

Chainsaw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:May 15, 2022, 10:26:53 am
  • Pac-Men
    • Chainsaw Films
Re: Capcom Q25 Cabinet
« Reply #3 on: November 26, 2005, 03:57:23 pm »
I think I got very lucky with the cab's price, it would normally go for much more I'd imagine. However, it was in bad condition and needed a lot of work to get cleaned up.

I tend not to like plastic looking Japanese cabs myself, but this one just has character, with the sharp lines and box-ish appearance.

Glad you guys like it, thanks for the feedback!

Matt

Sparky

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:March 14, 2012, 09:01:32 pm
  • Astro City, Baby!
    • Future Home of Sega Saturn Database
Re: Capcom Q25 Cabinet
« Reply #4 on: November 27, 2005, 02:58:52 pm »
That is a nice cabinet! I have been wanting to pick one up just to put Street Fighter in there and make it feel official.

Like  SaiNRuB said, those Q sound speaker grills look nice.

This cabinet has become a bit less common around here, but I hope I can find one for a good price.

Nice restoration job too!  ;) Your cabinet looks amazing... :o

xxprince56xx

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:November 15, 2006, 04:17:43 pm
  • I want to build my own arcade controls!
Re: Capcom Q25 Cabinet
« Reply #5 on: November 29, 2005, 11:19:53 am »
Hey, Nice site. I recently bought the same exact cab here in NY. I have been trying to find some about this cab (I recently made a post about it). Do you think you can tell me how you opened the cp? How does it come off? Does the whole thing come apart or does it have hinges? How hard was it to take the whole cab apart? I'm also thinking about restoring it. Do you a picture of the pc amp you used to connect the speakers to the computer? Thanks alot.
« Last Edit: November 29, 2005, 12:55:22 pm by xxprince56xx »

Chainsaw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:May 15, 2022, 10:26:53 am
  • Pac-Men
    • Chainsaw Films
Re: Capcom Q25 Cabinet
« Reply #6 on: November 29, 2005, 06:54:53 pm »
One question at a time mate ;)

Taking the CP off - not too hard. Lift the monitor hood and you'll see two metal clips facing the monitor under the CP. Push them in and you can now move back the top of the CP. It may be tricky to slide it off and may need a screw driver wedged in the gap. Make sure you unplug the wire interfaces for player 1 and 2 before fullying taking it off (you'll know them when you see it).

After that, the rest comes off by removing lots of screws, as seen on my site. Just note what screw goes where!

Taking the whole cab apart takes a good few hours, mainly because you area always finding new screws. Just go slow. I had to take the monitor out myself, be careful here it is very heavy and awkward and you'd benefit from having some help.

The PC amp was easy. It's literally a standard subwoofer / amp which had two speakers you connected with standard phono leads. Buy a couple of phono plugs, cut the cab speakers at the bottom [where they'd plug in to the Q-Sound amp] so you just have wire, and wire them in to the phono plugs. Easy. Can't recall but I think the earth is the outer casing on the phono plugs. I guess you should watch impedence and check the amp matches the ohms of the speakers, but I didn't and they work fine for me.

Good luck, and more questions please post them, and keep us updated of your progress!

Matt

PS - in reply to other posts, I also really like the Q-Sound grills. I had them repainted as they were faded and a little rough in places, I think it really makes the cab stand out  ;D

xxprince56xx

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:November 15, 2006, 04:17:43 pm
  • I want to build my own arcade controls!
Re: Capcom Q25 Cabinet
« Reply #7 on: November 30, 2005, 01:10:13 pm »
One question at a time mate ;)

Taking the CP off - not too hard. Lift the monitor hood and you'll see two metal clips facing the monitor under the CP. Push them in and you can now move back the top of the CP. It may be tricky to slide it off and may need a screw driver wedged in the gap. Make sure you unplug the wire interfaces for player 1 and 2 before fullying taking it off (you'll know them when you see it).

After that, the rest comes off by removing lots of screws, as seen on my site. Just note what screw goes where!

Taking the whole cab apart takes a good few hours, mainly because you area always finding new screws. Just go slow. I had to take the monitor out myself, be careful here it is very heavy and awkward and you'd benefit from having some help.

The PC amp was easy. It's literally a standard subwoofer / amp which had two speakers you connected with standard phono leads. Buy a couple of phono plugs, cut the cab speakers at the bottom [where they'd plug in to the Q-Sound amp] so you just have wire, and wire them in to the phono plugs. Easy. Can't recall but I think the earth is the outer casing on the phono plugs. I guess you should watch impedence and check the amp matches the ohms of the speakers, but I didn't and they work fine for me.

Good luck, and more questions please post them, and keep us updated of your progress!

Matt

PS - in reply to other posts, I also really like the Q-Sound grills. I had them repainted as they were faded and a little rough in places, I think it really makes the cab stand out

Chainsaw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:May 15, 2022, 10:26:53 am
  • Pac-Men
    • Chainsaw Films
Re: Capcom Q25 Cabinet
« Reply #8 on: November 30, 2005, 06:11:01 pm »
Cool  8)

Orclord

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 197
  • Last login:October 16, 2009, 03:09:38 pm
Re: Capcom Q25 Cabinet
« Reply #9 on: December 07, 2005, 06:23:49 pm »
Hi

Just thought I'd Say I've Just read your site and I must say I loved it...I was laughing as I read it

Coz basically I aint got a clue what I'm doing either and I'm going through the same at the Mo...

Just bought a Sega System 3 Cab was just gonna use it.....But and this is a BIG but...It would not fit through the doorways in my house, so I am in the process of striping it down.....I shite myself when I was lifting the 29" Monitor out today... LOL

In the process of cleaning things up at the mo and you're right boy do these things hold some shite, I've just got to get the actual cab apart tomorrow.....Oh and I have 4 days to clean and rebuild it in my room, otherwise GF will insert a red hot poker.....

A&E here I come....


 ;D

Chainsaw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:May 15, 2022, 10:26:53 am
  • Pac-Men
    • Chainsaw Films
Re: Capcom Q25 Cabinet
« Reply #10 on: December 07, 2005, 09:27:19 pm »
Good luck there mate! I was originally working to a time limit, but that went out the window. The more I got done, the more there was to do, but stick with it and you'll get there!

Hope you had some help with that monitor, mine's only 25" and it nearly killed me. Feel that hernia  :P

Glad you liked the site, hope to do a few more general gaming articles when I have time, maybe one every couple of weeks, so please check back from time to time.

Matt