Arcade Collecting > Pinball
My Pinball Playfield Swap - Stargate - All Electronics Done!
Buddabing:
I vacuumed out the cabinet, this is what it looked like before vacuuming.
Buddabing:
I puchased a new knocker assembly. The bracket was there but not the solenoid. I figure someone cannibalized it. Unfortunately, it did not come with a wire harness.
Buddabing:
I also purchased a new coin door. For some reason the plastic tub is too tall so I need to go to the Cointainer Store :) and get one the right size. Also, the wiring is different from my old coin door to the new one, so that's something else I have to wire up.
Buddabing:
10 plastic posts done.
There are two ways of attaching the plastic posts to the playfield. Wood screws and T-nuts. Surprisingly, the wood screw ones have been easier. All that I need to find is the dimple, which can be difficult on a black background, then apply gentle pressure straight down with the nut driver.
The T-Nuts have given me problems. Several plastic posts have been cracked or broken because of overtightening. Also, two of the screws have sheared off completely.
Buddabing:
20 plastic posts done.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version