Author Topic: no ipac needed to play dreamcast with a cp? (Read 3144 times)

mo1e · « **on:** October 05, 2005, 02:56:57 pm »

is it true that an ipac isnt needed to play a dreamcast with my cp and if so is a dreamcast controller needed to be hacked? if so am i correct in thinking this is done by soldering the wires from the cp buttons to the corresponding button pads on the dreamcast controller?

Stingray · « **Reply #1 on:** October 05, 2005, 03:05:16 pm »

Quote from: mo1e on October 05, 2005, 02:56:57 pm

is it true that an ipac isnt needed to play a dreamcast with my cp and if so is a dreamcast controller needed to be hacked?

Yes.

Quote

if so am i correct in thinking this is done by soldering the wires from the cp buttons to the corresponding button pads on the dreamcast controller?

Also yes.

-S

mo1e · « **Reply #2 on:** October 05, 2005, 03:10:22 pm »

OMG yey im correct for once so all i do is take apart the controller and do i connect the joysticks to the digital pad part and not the analog?

Stingray · « **Reply #3 on:** October 05, 2005, 03:21:32 pm »

Correct, the joystick will connect to the direction pad, not the analog stick.

-S

mo1e · « **Reply #4 on:** October 05, 2005, 03:24:50 pm »

kool when my dreamcast arrives i will give it a shot sounds pretty easy to me as i can solder but then again who cant right?

HaRuMaN · « **Reply #5 on:** October 05, 2005, 05:35:13 pm »

Quote from: mo1e on October 05, 2005, 03:24:50 pm

kool when my dreamcast arrives i will give it a shot sounds pretty easy to me as i can solder but then again who cant right?

you'd be suprised...

mo1e · « **Reply #6 on:** October 05, 2005, 05:37:17 pm »

lol well i think im ok im only 18 but i did it in school and also i build circuit boards for a living lol

mo1e · « **Reply #7 on:** October 05, 2005, 05:38:01 pm »

also is it as simple as just taking it apart and wiring up the wires?

Goz · « **Reply #8 on:** October 05, 2005, 05:44:55 pm »

You can also go the X-Arcade BYOA Kit route and have it wired to your control panel in 15 minutes and playing games. If the cab will be dedicated Digital control Dreamcast games then go with the hacked pads that HarumaN sells. If you are going to add additional consoles or MAME in the same cab then look at the other options.

Dreamcast in a cab is a beautiful thing....

-Goz

mo1e · « **Reply #9 on:** October 05, 2005, 05:46:40 pm »

yer purely dreamcast in a cab to play dreamcast games maybe but mostlt the snes emulator and the genesis/mega drive emulator cant i hack my own pads? or is that really hard?

spiffyshoes · « **Reply #10 on:** October 05, 2005, 06:57:35 pm »

No of course you can't hack your own pads!! I forbid it!

mo1e · « **Reply #11 on:** October 05, 2005, 07:13:04 pm »

lmao except from that lol

HaRuMaN · « **Reply #12 on:** October 05, 2005, 08:28:57 pm »

You must let me do it!

Seriously, though, it isn't too hard if you have soldering skill. Hacking the analog triggers (the L and R buttons) is probably the most difficult aspect. Other than that, wire one common ground, and a wire for each button and direction.

(You end up with 12 wires in all- A, B, X, Y, Start, L, R, Up, Down, Left, Right, and Ground.)

mo1e · « **Reply #13 on:** October 05, 2005, 08:30:38 pm »

ground? o and what bout the vmu?

HaRuMaN · « **Reply #14 on:** October 06, 2005, 05:18:41 am »

yeah... you have to daisy chain a ground between all your switches. And the VMU slots are still there, so they will work no problem.

mo1e · « **Reply #15 on:** October 06, 2005, 02:07:43 pm »

ok please explain a daisychain between the switches a quick work in paint should show me how

dennis808 · « **Reply #16 on:** October 06, 2005, 05:52:20 pm »

because a picture says more than...

The blue wire is daisychained (common ground)
a closeup here: http://dennis808.herejezus.nl/arcade/P086.JPG

and here's the hacked pads (with VMU inserted in one)

and the front:

mo1e · « **Reply #17 on:** October 06, 2005, 05:55:33 pm »

woooo spaghetti junction

mo1e · « **Reply #18 on:** October 06, 2005, 06:42:15 pm »

k the red wores from the control into the white bos thingy then a wire from that to the dreamcast button this is done for each button but what is the bl;ue wire for and what does it connect to? does it just connect from one button to the other until it gets back around for each player?

dennis808 · « **Reply #19 on:** October 06, 2005, 07:19:08 pm »

http://arcadecontrols.com/arcade_wiring.shtml#General_Theory


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news