Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Help with Sampo monitor  (Read 1944 times)

0 Members and 1 Guest are viewing this topic.

maxstang

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 58
  • Last login:June 06, 2012, 11:02:11 am
  • New to this!
Help with Sampo monitor
« on: September 13, 2005, 09:18:02 pm »
OK...so forgive the newbie questions, but I've never worked with an arcade monitor before...

Got a FREE working Sampo 19 inch monitor (KGR1901H) to put in a Pac-man I'm restoring and I'm confused by the inputs.  I've only ever worked on a Electrohome G07 before.  The Sampo has a  well marked RGB and Sync input on the main board, but there is also a secondary board with a large transformer on it and a multiplug coming off of it.  The multiplug is the same size as the RGB/sync input plug (it has 6 wires on it).  This accessory board has the brite, contrast etc pots on it.  Is this extra plug just for a remote adjustment board for the monitor or something else. I'm confused...
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Help with Sampo monitor
« Reply #1 on: September 14, 2005, 01:24:57 am »
Well according to the Sampo KGR-1901H Service Manual I have, this monitor was not manufactured with a remote adjustment board.
Logged

maxstang

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 58
  • Last login:June 06, 2012, 11:02:11 am
  • New to this!
Re: Help with Sampo monitor
« Reply #2 on: September 14, 2005, 12:47:04 pm »
Thanks for the response!  How much do you want for a photocopy of the manual you have.  It's not posted on the web that I can find. 
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Help with Sampo monitor
« Reply #3 on: September 16, 2005, 12:41:38 am »
I've mailed you a photocopy of the manual and schematics.
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Help with Sampo monitor
« Reply #4 on: September 19, 2005, 11:24:17 am »
You should have recieved the manual by now.
Logged
Pages: [1]
  
Go Up
« previous next »