Author Topic: Stencilling Service (Read 37774 times)

johnvv · « **on:** August 16, 2005, 07:50:52 pm »

A friend recommended the

zorg · « **Reply #1 on:** August 16, 2005, 11:18:27 pm »

Quote from: johnvv on August 16, 2005, 07:50:52 pm

I was going to use them for my Joust, but found some errors in the electronic versions of the art, so am going with tracing of the original art instead.

can you elaborate a bit please

johnvv · « **Reply #2 on:** August 17, 2005, 01:12:30 am »

Regarding the orginal Joust artwork on my cab vs. the vector images at localarcade.com, I found a number of differences, most fairly minor. The shapes of a number of objects in the original art were different than those in the vector files - varying up to 3/4" in some cases. As an example of a larger difference, the eye of the ostrich mount in my original artwork is at a completely different angle than than of the vector art.

Overall, the vector art is very close to the original, matching in many instances, but different enough for my purposes of as close to a 100% restore as possible, that I opted for the the hand stencil. That is not a good economic and time decision, as the vector art would be much faster and cheaper to use than hand tracings of the original.

I have not idea why the differences exist. I am guessing that they may have been some variation in the stencils used for the original Joust art over the life of its production.

zorg · « **Reply #3 on:** August 17, 2005, 10:10:33 pm »

OK thank's for pointing this.

as you say I guess those "small" differences are comming from the variation over time in the stencils used to produce the side-art, also maybe the use and positionement of the stencils may sligthly change the result.

I was surprised when you mentioned some differences as the original sources of the file hosted in AAL was available on spies.com. and it's really a great quality piece of art.

johnvv · « **Reply #4 on:** August 26, 2005, 12:32:29 am »

In case anyone is interested, I did get a quotation from www.stencilsonline.com to cut the Joust vector art at localarcade.com.

For the a three layer stencil (3 color in Joust art) the price was $88.50. They would cut a duplicate set for an additional $32.50. Not bad pricing in my opinion. I would expect their work to be excellent, given the equipment they are using. The stencil would be cut on 10 mil reusable mylar, so they could be easily cleaned and re-used or just re-sold. Probably a better solution than some of the paper stencils around.

Also, because the Joust art is over 52" high, they have to cut each stencil in two, so the cost is probably a bit higher as a result.

Definitely worth checking out if you are going to be using any vector art.

mahuti · « **Reply #5 on:** September 21, 2005, 01:02:10 pm »

Pretty cool. If they're not too expensive, I may finally complete my Defender side art. Hand cutting stencils for the front was quite tedious, and I wasn't looking forward to doing the sides in that manner. I'll report back with their quote cost.

allroy1975 · « **Reply #6 on:** September 21, 2005, 02:54:30 pm »

Quote from: johnvv on August 26, 2005, 12:32:29 am

For the a three layer stencil (3 color in Joust art) the price was $88.50. They would cut a duplicate set for an additional $32.50. Not bad pricing in my opinion. I would expect their work to be excellent, given the equipment they are using. The stencil would be cut on 10 mil reusable mylar, so they could be easily cleaned and re-used or just re-sold. Probably a better solution than some of the paper stencils around.

am I reading this right? you could order one for 88.50 then a 2nd for 32.50 that you could sell on ebay to help recoup your $$?

Allroy

Rook3 · « **Reply #7 on:** September 21, 2005, 05:45:35 pm »

I'd do this for my Williams Stargate cabinet, but even the art library doesn't have completely accurate Stargate art.

Maybe that's another project in my future, just taking some HQ photos of my stripped cab, and vectorizing them. Should I curse the project? "How hard could it be?"

Russ

johnvv · « **Reply #8 on:** September 22, 2005, 12:32:41 am »

allroy1975:

Yes, you are reading this right. The quotation they gave me for the Joust was $88.50 for the first set (which, in my case, is actually six sheets - two each color. Each color is split into two sheets due to the size of the graphic). An additional complete set was $32.50. I'm pretty sure the difference in cost is simply their labor in reviewing the art files and setting up the robot to cut the stencil. Additional copies of the same thing probably cost them virtually nothing beyond materials. I don't recall the cost of shipping, but is was probably $15-$20 due the size of the tube - check their site.

I suppose you could re-sell them, but that may get into issue with the 'right to use' from localarcade. Someone else would know more about that topic than would I.

mahuti · « **Reply #9 on:** September 22, 2005, 12:47:24 am »

localarcade has no rights.

Ravage · « **Reply #10 on:** September 22, 2005, 04:44:28 am »

I origianlly did the vectoring of the Joust art thats out on the net (if its the version I'm thinking of).
It was actually scanned from a NOS sideart sticker rather than an original cab. I have updated the files here at home as I too want to get stencils made for joust and stargate, I'll dig'em out and upload them to localarcade in a bit
Cheers
Rav

allroy1975 · « **Reply #11 on:** September 22, 2005, 12:25:22 pm »

yeah it seems like it might get more into who owns the original copyright for the art.

Like...I might just get some Ms. Pac Man stencils printed....I bet someone would get pissed if I started selling those on ebay for $50 a pop. I don't really understand how they'll know if they stencils I mad or if they're bought from a licensed distributor and then I didn't need them anymore and sold them?

that's just my crooked way of thinking.

Allroy

Wade · « **Reply #12 on:** September 22, 2005, 01:31:45 pm »

This is a lot cheaper than any option I've seen before. We should really look into this more. I could only get the Taito sideart stencil (1 color) for about $90. This sounds far cheaper. This would be great for the popular Williams games, and possibly even Pac and MsPac.

Wade

Rook3 · « **Reply #13 on:** September 22, 2005, 08:38:05 pm »

If you bought a single set for your own use, then sold them off after you were done, I don't see the harm.

Now, if you're selling off boatloads of them at $50 a pop, I can see why there might be issues with that.

Russ

mahuti · « **Reply #14 on:** September 22, 2005, 08:55:59 pm »

They gave me a quote of about $78 for defender side stencils. That's pretty dang cheap.

Anybody want to go in on a set or 2?

allroy1975 · « **Reply #15 on:** September 23, 2005, 10:24:35 am »

Quote from: Rook3 on September 22, 2005, 08:38:05 pm

If you bought a single set for your own use, then sold them off after you were done, I don't see the harm.

Now, if you're selling off boatloads of them at $50 a pop, I can see why there might be issues with that.

Russ

Gotta sell boatloads to pay for mine.

Rook3 · « **Reply #16 on:** September 23, 2005, 11:19:33 am »

Quote

I have updated the files here at home as I too want to get stencils made for joust and stargate, I'll dig'em out and upload them to localarcade in a bit
Cheers

Ravage, did you say you had the accurate Stargate art done already?

Russ

Crazy Cooter · « **Reply #17 on:** September 23, 2005, 12:13:01 pm »

Quote from: Wade on September 22, 2005, 01:31:45 pm

This is a lot cheaper than any option I've seen before.

mahuti · « **Reply #18 on:** September 23, 2005, 12:35:30 pm »

Select "get a quote" from their website.

clanggedin · « **Reply #19 on:** September 23, 2005, 02:26:56 pm »

Mahuti,

I'm interested in a set of Defender stencils. I'll go in with you for a set.

prOk · « **Reply #20 on:** September 23, 2005, 07:06:28 pm »

you guys do realize these will be plotter cut vinyl and one time use only right??

Rook3 · « **Reply #21 on:** September 24, 2005, 04:47:58 pm »

I believe they're laser cut mylar, and reuseable.

In fact...

Quote

What type of material are the stencils cut on?

Most of our materials for custom stencils are polyester film (Mylar). We have laser cut many different materials to find the perfect product and we find that the polyester film works the best!

Why Polyester (Mylar)?

The three things you want to consider when choosing a stencil material are:
How strong is it?
How easily can it be cleaned?
Will it achieve crisp stenciling results?
Polyester is quite strong. It has the ability to be rolled very tightly and it will always bounce back to its flat shape. If you take a square sheet of polyester, even the thinnest 5 mil, you will not be able to tear it using your hands.

The secret to a long stencil life is the ability to clean paint or ink off your stencil. Polyester is one of the very few plastic materials that is solvent proof. You can clean your stencil with paint remover, acetone (fingernail polish remover), turpentine/mineral spirits, or anything recommended to clean paint, and you won't damage the stencil material in any way.

All material in the polyester family is flexible. This is very important when you are stenciling because it can conform to curved surfaces as well as the subtle variations on flat services. This will provide a more crisp and professional look than you can achieve using a rigid stencil material.

How long will a stencil last?

Many variables go into answering this question. The most important factor is how you take care of your stencil. The best way to ensure a long stencil life is to clean the paint off your stencil after you are finished. There is no need to clean the stencil so it looks new, you just need to keep paint from building up around the edges. Many of our customers have successfully used a single stencil for hundreds of applications.

Russ

tristan · « **Reply #22 on:** September 24, 2005, 08:32:05 pm »

I'd probably go in for a Defender set as well.

Flinkly · « **Reply #23 on:** September 26, 2005, 11:03:29 pm »

dang, too bad i'm making a larger than normal neo geo cab, otherwise i might be able to sucker someone into splitting the charge with me. mine wouldn't cost too much either.

how would you guys put the paint on? for stenciling, spray seems to be the best, but i wouldn't want to use a can...could you roll or brush it on? would the lines really be that crisp? i've taped stuff off before and never been able to get a great line...they weren't horrible, but it had alot of little bleed outs.

johnvv · « **Reply #24 on:** September 27, 2005, 12:49:27 am »

Flinkly:

I think most folks that are going to all this effor to stencil are using professional spray guns - typcially HVLP. I think some folks own them while others rent.

The key to applying spray is practice. Make some simple cutouts on mylar and try some light spraying. Eventually, you'll get good edges and a smooth application to the base. Several light coats are a good strategy. There is a good description of how to stencil on rgvac.com (under Restoration).

prOk:

What are you talking about? As noted above, the service clearly describes the materials you can use, their re-usability, etc.

mahuti · « **Reply #25 on:** September 27, 2005, 09:02:00 am »

When I did the front of my Defender with my (hand cut) stencils, I just used spray cans and it turned out great.

You can see a picture here

The thing that helped me was using a pistol grip add-on for the cans, and applying many extremely light dustings of paint for a very smooth & opaque finish. At first it was maddening... applying such a quick light dusting of paint. I got some alkyd based enamel paint that could be painted over again about every 20 minutes, so after the first day, I could tell that it was going to look really great.

Anyway... If there's one guy around here that knows how to stencil, it's a bunch of pr0k's stuff up at rgvac... that's his stencilling tutorial. He may have it wrong on what they're using, but he know's about the rest of this stuff.

mahuti · « **Reply #26 on:** September 27, 2005, 09:11:06 am »

Oh, and anyone that want's a set of the defender stencils... It's probably prudent for me to order full sets, rather than to use a set and then play pass the trash. They can get damaged easily regardless of what the docs say. Anyway, as long as they're better than my hand cut stencils, I'll be a happy camper.

1. Contact me before 9-30-05 if you want a set. With 3 orders they're currently going to be about $50 / set. For each additional set, it will reduce the price a bit... 5 orders would bring the price to about $42. If they are reusable (as they claim) you can always sell the stencil on eBay after you're done.

2. I can take payment by paypal, I'll let you know the price after I get the final tally. I'm sure it will take a few weeks for them to get the art turned around and sent to me, so we'll have some time.

Flinkly · « **Reply #27 on:** September 28, 2005, 01:48:24 pm »

yeah, i've got a sprayer, but not for the kind of paint i was going to use. i guess mahuti's got the right idea with cheap and simple, although tedious. sounds good enought to me.

what about adhesion? do you spray the back with something and stick it in place? i guess i want to figure all this out before i get any deeper.

mahuti · « **Reply #28 on:** September 28, 2005, 01:54:40 pm »

From their faq;

Step 1: Hold your stencil in place. Many people use masking tape or painters tape to hold the stencil in place. You may also wish to consider using a repositionable stencil adhesive. This is a light adhesive spray that you can apply to the back of your stencil. The adhesive will hold the entire back of the stencil to your surface instead of only the areas that are taped. The adhesive allows you to achieve outstanding results for creating a crisp stencil job. The adhesive will gradually wear off your stencil as you use it and, at this point, you need to spray the back of the stencil with adhesive again. The adhesive will not leave any residue or damage your stenciling surface. You can remove the adhesive with acetone or any product that removes adhesive. It is available at almost every craft supply or art supply store.

Flinkly · « **Reply #29 on:** September 28, 2005, 04:35:22 pm »

ok, ok, so i'm horrible at reading the information provided...i guess i'll get off my butt and read for any other questions i have.

this does seem like an incredible service though, and it sounds like we might have some user opinions within the next month.

prOk · « **Reply #30 on:** September 28, 2005, 08:54:51 pm »

My bad, I misread what they said.. it seems they're using some kind of mylar which does present it's own set of difficulties, but can work. Problem is painting the cabinet while standing up will be hard so you won't be able to get the ideal straight ahead angle with the spray can.. Mylar is pretty heavy stuff when it gets that big, so even the photo mount trick might not work to hold it in place

I'm in the process of starting up a vinyl stencil cutting setup of my own, hopefully i'll be able to offer one time use adhesive stencils for a pretty darned good price..

/b

http://www.rgvac.com

mahuti · « **Reply #31 on:** September 28, 2005, 09:40:52 pm »

All I know... either one has to be better than my hand cut frisket stencils. They worked really well, and they were really easy to remove when I was done... but damn they were a pain in the but to hand cut.

Rook3 · « **Reply #32 on:** September 29, 2005, 12:23:08 am »

Hand cutting stencils SUCKS!

Inman · « **Reply #33 on:** October 04, 2005, 09:12:11 pm »

Hello! Inman here - I've been working on a Defender cabinet with the help of SpyStyle and decided to order stencils from the stencilsonline stenciling service. They were quick to respond with my proofs & my order shipped quickly. In fact, I received it today & promptly checked out sizing etc. once they arrived.

The material looks very solid and I'm sure it will work fine but I'm not sure what paint would work best. Talking it over with others, we're thinking auto spray is pretty darned tough and would do the job against a black latex background. ...then go with a clear epoxy or auto paint finish for protection.

Anyone ever used stencils over black latex like this? I suppose this could be a whole new topic, but it is directly relevant to the main post. Any input would be appreciated.

prOk · « **Reply #34 on:** October 04, 2005, 10:11:57 pm »

got any pictures of the stencils??

mahuti · « **Reply #35 on:** October 05, 2005, 12:13:16 am »

I would not suggest using latex for this.

Use enamel. Go to your local knowlegeable paint store and tell them what you are doing, and they will suggest a good paint for you.

I typically use alkyd based enamel paint with an enamel primer. Use enamel for the colors as well. If you already painted your cabinet with latex... well...

Anyway, I've used stencils over ENAMEL before. You can see the results in the links in my sig.

Inman · « **Reply #36 on:** October 05, 2005, 12:07:49 pm »

I'll try to post some pictures of the stencils when I get a chance. I hope to actually apply them this weekend so I'll post pictures of the finished product too (if I find the time).

mahuti - cabinet is already painted with black latex

, but I appreciate your tips. I may use enamel on my next cabinet. ....will be off to the local paint shop to get some recommendations. Checked out the Defender pics on your site. Nice! Can't wait to get mine completed.

So far so good with stencilsonline.com, but the real test will be when the artwork is applied.

Inman · « **Reply #37 on:** October 06, 2005, 09:43:57 pm »

I didn't get a chance to take pictures of the actual stencils, but I did put together a nice little slideshow of my Defender Cabinet progress to date & added Voice Over.

Inman · « **Reply #38 on:** October 08, 2005, 07:40:15 pm »

I applied the stencil side art to my cabinet today.

Wade · « **Reply #39 on:** October 12, 2005, 11:07:19 am »

The base color I used on my Moon Patrol was a flat latex paint I got mixed at Lowe's. The two colors I stencilled were spray cans. I didn't really have any problems related to the paints (I did have problems getting a nice clear coat, but that had nothing to do with the paints underneat). In fact, the clear I eventually used was Polycrylic, which is also a water based paint. So I have a weird mix of paint types on that cabinet.

It seemed to work just fine though.

Wade

mahuti · « **Reply #40 on:** October 12, 2005, 11:14:31 am »

On something like a cab that suffers heating changes, moisture damage (drinks) constant hand touching ... it's always better to use oil based enamels for longevity of the paint.

I wouldn't recommend stripping a cab over a mixup on the perfect paint... but do it right if you can.

spriggy · « **Reply #41 on:** December 05, 2005, 09:55:45 am »

Quote from: Crazy Cooter on September 23, 2005, 12:13:01 pm

How do we get a quote?

prOk · « **Reply #42 on:** December 07, 2005, 10:16:06 pm »

I can cut these out of adhesive stencilling vinyl for 65.00.

Wienerdog · « **Reply #43 on:** December 26, 2005, 01:11:14 pm »

Quote from: prOk on December 07, 2005, 10:16:06 pm

I can cut these out of adhesive stencilling vinyl for 65.00.

prOk · « **Reply #44 on:** December 26, 2005, 02:34:11 pm »

The main advantage of vinyl is that you can put all colors in one and the artwork actually sticks to the cabinet while you paint it. This does two things, one, keeps the edges very nice and crisp (you can mimic overspray if you wish) and it keeps all the colors perfectly registered on the cabinet saving time and headaches of switching and aligning subsequent stencils. Yea, for a touch more you can get thin plastic stencils that you can potentially re-use.. but don't forget, for those to truly work correctly you need to put some kind of adhesive on them anyway to stick them to the cabinet or you'll have tons of overspray and an imprecise final product. After use, you have to deal with cleaning that adhesive off and hope they don't curl up during painting. (Not intending anything negative, but look at the photos of the 'multi use' stencils on the defender within this thread, you clearly see lots of overspray which is the nature of that kind of stencil, not anything the painter did wrong). Add to that, the reality that you're most likely not going to paint two or more of any one game in your lifetime, most people do one game and keep it and the stencils would just get stored somewhere forever anyway. My goal really was to offer a much better quality final product than is currently available on the market.. Paper ones, thin plastic ones etc have been around forever and they are tough to work with (i've done tons of stencilled games over the years using all of them, my technique of using Acetate and Photo mount has been around for a long time when I didn't care for the ones commercially available) no, it's not re-usable, but yes it will look better when you are done and at 60 bucks or so, it's cheap.

Rook3 · « **Reply #45 on:** December 26, 2005, 05:02:37 pm »

Quote

The main advantage of vinyl is that you can put all colors in one and the artwork actually sticks to the cabinet while you paint it.

So what you're offering is a removeable adhesive vinyl stencil?

Do you have any pics of the item in question?

Russ

prOk · « **Reply #46 on:** December 26, 2005, 08:23:06 pm »

Right.. 100% removable stencil vinyl.
Here's what an example of the Taito art looks like in stencil form..

Rook3 · « **Reply #47 on:** December 26, 2005, 10:36:27 pm »

Do you have any pics of something more complex? For thae Taito art,
is that a full side mask, with the "black" areas removed for painting?

I'm wondering how hard it would be to do the Williams Stargate art.

Russ

spriggy · « **Reply #48 on:** December 26, 2005, 10:54:48 pm »

Quote from: prOk on December 26, 2005, 08:23:06 pm

Right.. 100% removable stencil vinyl.
Here's what an example of the Taito art looks like in stencil form..

Ahhhh...

prOk · « **Reply #49 on:** December 27, 2005, 09:54:15 pm »

Yup spriggy, I started with your file.. The Taito stencils have been tested on a real cab by someone that'll be sending me pictures of it soon.. I made lots of tiny adjustments to the file to get it closer on a real cab but the result what I'm told was very good.

Actually, taito art is much more complex than stargate Roook. I have stargate stencil files already tested and ready to go.

/b

spriggy · « **Reply #50 on:** December 27, 2005, 11:58:41 pm »

Quote from: prOk on December 27, 2005, 09:54:15 pm

Yup spriggy, I started with your file..

saint · « **Reply #51 on:** January 07, 2006, 04:40:16 pm »

Prok - saw that you had Gyruss stencils available. What's the cost for those? Any chance you have recommended paint codes? Does a set of stencils include both sides and the front?

Thanks!

--- saint

prOk · « **Reply #52 on:** January 07, 2006, 05:21:45 pm »

HI.. I charge 45.00 for a set of Gyruss stencils. To save costs and make them much easier to align I put all the colors on one stencil because they don't overlap.. just remove the colors one by one from the applied stencil and paint them while covering up the previously painted color. A little more work, but guaranteed to be lined up right rather than trying to get all the layers just right between stencils. I've never seen a gyruss with front art??

I just scanned a Stargate Mini and Juno First upright today.. hope to have stencils for those soon as well..

/brian

Inman · « **Reply #53 on:** February 17, 2006, 01:46:51 pm »

I used Stencilsonline for a full sized home-made Defender cabinet. Everything turned out so well that I decided to get a quote on a mini-Defender cabinet I'm building. Luke at Stencils Online asked me to post his reply in this thread and offers the following discount:

I have been recently directed to the website where you and a number of your colleagues have been discussing refurbishing arcade cabinets. Fascinated with your projects, as well as pleased with the good word put in, we have decided to make an offer to the forum.

I wanted to post as much in the thread made, but I cannot get an account. Please pass on the following.

Knowing that the files provided are public access, we are willing to offer a 15% discount to anyone who mentions that thread. We will also begin storing arcade cabinet files for anyone who wants them and cannot find them on their own, so we encourage everyone to send in their files!

At any rate:

Your stencils will cost $89 to cut in total, minus the %15 discount brings it to $76. This includes both layers.

We have your billing information on file, so all we need from you is confirmation of the order, as well as any updates you may need.

Regards,

Luke Bouley

Stencils Online
www.stencilsonline.com

ChadTower · « **Reply #54 on:** June 29, 2006, 03:35:40 pm »

That is incredible. I'm going to contact them now about Ms Pac stencils. Anyone need a set?

EDIT:

Hey, that place isn't too far from me. Maybe I should offer to drive up and get a more detailed accounting of their setup.

ataritoobin · « **Reply #55 on:** June 29, 2006, 04:05:38 pm »

I'd be in for a set of Ms. Pac-Man stencils..though I don't know how the silk-screened black would come out (e.g. 1981 Midway Mfg. Co.). I would think if some bits were left out on the black outlines, they could be hand touched up.

ChadTower · « **Reply #56 on:** June 29, 2006, 04:17:03 pm »

Just checked the buy/sell forum... apparently there is a group buy of Ms Pac stencils going on... so I'll see if I can get in on that. If not, at least the stencil makers know how to make them already.

Buddabing · « **Reply #57 on:** June 30, 2006, 12:36:16 pm »

I've added this vendor to the vendor wiki.

ataritoobin · « **Reply #58 on:** August 29, 2006, 12:34:49 am »

It seemed like the results of the Ms. Pac-Man stencils weren't very satisfactory.

Prok, how much would you charge for Ms. Pac-Man stencils? The black I'd imagine would be the most difficult/intricate.

prOk · « **Reply #59 on:** August 29, 2006, 03:26:11 pm »

I could do them I believe, but I do not have color separations for ms pac.. the Pink/Yellow/Black that are usable for stencilling.

Whoever drew the art on Localarcade did a good job if you were going to print them, but to try and make stencils I don't think they'd come out good without some significant modification. I tried cutting them once and actually redid the Yellow and Pink but the black was just going to be too much time so I dropped it.

If someone wanted to try and rework that art with stencilling in mind i'm willing to cut a set of stencils and have someone here test them.

I think the other effort ran into two problems.. first, the same issues I mentioned regarding the artwork itself and second, Mylar + small pieces = a mess. I know people want to re-use stencils for some odd reason, but really 90% of folks out there use stencils once on their one game and that's it.

usedelectronics · « **Reply #60 on:** September 26, 2006, 10:30:07 pm »

Quote from: ataritoobin on August 29, 2006, 12:34:49 am

It seemed like the results of the Ms. Pac-Man stencils weren't very satisfactory.

There's a understatement.

ChadTower · « **Reply #61 on:** September 27, 2006, 10:02:38 am »

I'd be perfectly happy with affordable single use stencils.

ataritoobin · « **Reply #62 on:** February 22, 2007, 02:52:44 pm »

Has anybody modified the Ms. Pac-Man artwork stencils per prOk's comment? This would be a great stencil to have vs. the decals IMHO.

Zeno · « **Reply #63 on:** July 01, 2007, 02:01:04 am »

Has anyone tried to use this link for the stencils?

If this works and if someone is willing to print and cut the stencil, I'm in for a set. Name your price.

prOK - What is your take on the link?

http://forum.arcadecontrols.com/index.php?action=dlattach;topic=50429.0;attach=45384;image

Take care all.

WunderCade · « **Reply #64 on:** July 01, 2007, 01:31:27 pm »

Saint probably knows what this link is about. Perhaps he could shed some light.

Quote from: Zeno on July 01, 2007, 02:01:04 am

Has anyone tried to use this link for the stencils?

If this works and if someone is willing to print and cut the stencil, I'm in for a set. Name your price.

prOK - What is your take on the link?

http://forum.arcadecontrols.com/index.php?action=dlattach;topic=50429.0;attach=45384;image

Take care all.

Zeno · « **Reply #65 on:** July 01, 2007, 02:45:24 pm »

FYI all...

I emailed Stencils Online and they said that they will not be doing any more stencils for arcades.

I guess it's tough dealing with people that demand perfection. $:-\$

prOk · « **Reply #66 on:** July 02, 2007, 12:22:54 am »

it's too bad really that I can't do namco stencils.. I have the ability and the artwork to make them but i'm just not ballsy enough to take my chances with the copyright lawyers

WunderCade · « **Reply #67 on:** July 02, 2007, 02:58:25 pm »

Quote from: prOk on July 02, 2007, 12:22:54 am

it's too bad really that I can't do namco stencils.. I have the ability and the artwork to make them but i'm just not ballsy enough to take my chances with the copyright lawyers

Just curious, did you ever get the black reconciled, I know it was a b--ch on stencils.

prOk · « **Reply #68 on:** July 02, 2007, 10:19:16 pm »

Yup.. I got the black for pac man looking beyoootiful.. ms pac, i'm 90% there but just never finished it.

WunderCade · « **Reply #69 on:** July 10, 2007, 01:52:53 pm »

Quote from: prOk on July 02, 2007, 10:19:16 pm

Yup.. I got the black for pac man looking beyoootiful.. ms pac, i'm 90% there but just never finished it.

I know you've said you can't/won't make the vinyl stencils for Namco - understandable.

Do the Pac/MsPac sideart vectors on AAL reflect your recent updates? I was thinking of trying out vinyl stencils (peel-stick) and posting the process up on the the board for my Ms. Pac restoration project in the PA thread.

BTW: I PM'ed you.

prOk · « **Reply #70 on:** July 10, 2007, 10:09:33 pm »

HI, no, I haven't upped my pac stuff to the AAL.. ms pac is'nt quite complete yet.. I'm also holding off because i'm starting the process of attempting to gain some kind of rights to reproduction of stencils for these games!

Zeno · « **Reply #71 on:** July 10, 2007, 11:04:12 pm »

Quote from: prOk on July 10, 2007, 10:09:33 pm

I'm also holding off because i'm starting the process of attempting to gain some kind of rights to reproduction of stencils for these games!

I'm with you prOK! Let me know what I can do. Do I need to send a petition to Namco?

WunderCade · « **Reply #72 on:** July 10, 2007, 11:40:03 pm »

Quote from: prOk on July 10, 2007, 10:09:33 pm

HI, no, I haven't upped my pac stuff to the AAL.. ms pac is'nt quite complete yet.. I'm also holding off because i'm starting the process of attempting to gain some kind of rights to reproduction of stencils for these games!

Good luck, that would be very kewl, I'm speculating that 2bits prices are soo high because of Namco's licensing fee. I doubt 2bits is just gouging. I also wonder if they gave 2bits exclusivity which seems to explain his lack of competition.

HighNoon · « **Reply #73 on:** July 14, 2007, 11:12:34 pm »

prOk,

Man it would be awesome to get my hands on a Pac stencil - I wouldn't tell a soul.

I don't know anybody.

WunderCade · « **Reply #74 on:** July 15, 2007, 12:36:07 am »

Get in line, pal.

HighNoon · « **Reply #75 on:** July 15, 2007, 12:01:40 pm »

Quote

Get in line, pal.

Exactly what I'm attempting to do.

ChadTower · « **Reply #76 on:** July 16, 2007, 10:30:14 am »

I've also been waiting a long time on Ms Pac stencils... mostly because I want to do one in alternate colors.

WunderCade · « **Reply #77 on:** July 16, 2007, 05:55:54 pm »

Quote from: ChadTower on July 16, 2007, 10:30:14 am

I've also been waiting a long time on Ms Pac stencils... mostly because I want to do one in alternate colors.

I am looking for a local shop here that has the proper set-up for the vinyl stencils, probably some of the graphics shops. I've ran into a brick wall here on the forum with vendors. None of them seem to want Ms. Pac side-art money, lol, like it's drug money or something. I guess they think the Namco police will show up at their door.

HighNoon · « **Reply #78 on:** July 16, 2007, 06:05:12 pm »

Quote

it's drug money or something. I guess they think the Namco police will show up at their door.

I wish someone would do a single run for us on the board (Pac & Ms Pac), but didn't advertise, and then got out. I believe nothing would come of it, perhaps a cease-and-desist order, that's all. Maybe I'm wrong, but man would it be cool to have a set of each.

My cabinet is dying for a repaint.

I'll keep crossing my fingers.......

WunderCade · « **Reply #79 on:** July 16, 2007, 06:14:51 pm »

Quote from: HighNoon on July 16, 2007, 06:05:12 pm

Quote
it's drug money or something. I guess they think the Namco police will show up at their door.

I wish someone would do a single run for us on the board (Pac & Ms Pac), but didn't advertise, and then got out. I believe nothing would come of it, perhaps a cease-and-desist order, that's all. Maybe I'm wrong, but man would it be cool to have a set of each.

My cabinet is dying for a repaint.

I'll keep crossing my fingers.......

Heck, even it was just a stencil of the black lines. The other colors are so simplistic in shape and coverage that I could do the other colors my myself with some clear Mylar. It's the black that sucks and is soo time consuming, especially on a Pac-Man machine.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news