Author Topic: Monitor tube swap. (Read 1245 times)

tba · « **on:** June 23, 2005, 02:56:37 pm »

i cant find much info on this area, but i was wondering if this can be done and if there are any web pages out there that might give me more info...

i have a Sharp XM-2001N in a Dr. Mario cab with SEVERE screen burn in which is listed as a 20" monitor... and i also have a 20" TV that the electronics don't work right in (almost new/ barely used, but it has a tendency to turn it self on at 3 am at full volume on a channel with static... so it is not much good).

so is this possible? i have some college electronics courses and am a telecommunication equipment tech... so i know my way around high voltages...

Ken Layton · « **Reply #1 on:** June 23, 2005, 07:17:56 pm »

Try these:

http://coinop.org/repair/Monitor_Tubeswap.aspx

www.rcilink.com/arcade/TubeSwap.htm

http://chux0r.org/20EZ.php

bjk7382 · « **Reply #2 on:** June 24, 2005, 12:33:26 am »

Yet another

http://www.ionpool.net/arcade/tubeswap/tubeswap.html


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Monitor tube swap. (Read 1245 times)

tba

Monitor tube swap.

Ken Layton

Re: Monitor tube swap.

bjk7382

Re: Monitor tube swap.