what tool for cutting diagnal?

[alundra]

i need to know a proper tool for cutting diagnal edge clean and smooth
like this http://us.f3.yahoofs.com/users/41b556e7zc1e5483b/5cbb/__sr_/1e99.jpg?ph6a8qCBtJFjWCfy
thanks

[tivogre]

A table saw will do this if it's a model with a tilting blade.

This is called a bevel cut.

Depending on the angle you want, you can also get a router bit, called a chamfer bit, at the correct angle and use that.

[Timoe]

It depends on the piece of wood you want to cut. If it is only 4" or so you can use a "chop saw" or Mitre Saw like this

[Timoe]

Or for pieces larger or wider than 4" You should use a table saw like tivogre suggested

they look like this.  They range from $119 to $3000. And you get what you pay for.  the $300-500 range should suit you fine for quality, accurate cuts.  If you're not going to be building much more than your arcade cabinet, this option might be a bit much.

With patience and planning a circular saw can give you "good enough" results and save you alotta $ and space.

[tivogre]

ooh!  ooh!

If we're doing pictures, here's a chamfer bit:



 

[Timoe]

If you're buying saws you NEED on of these..,

A circular saw.

[alundra]

Or for pieces larger or wider than 4" You should use a table saw like tivogre suggested

they look like this

that thing look expensive..how much is it?

[Timoe]

see the above post (edited) for table saw price.  You can get a decent circular saw for $80 (including blade)

[Timoe]

I would strongly recommend this thread (if you haven't read much of it already)

http://forum.arcadecontrols.com/index.php/topic,19049.0.html

there is MUCH to read there but take your time and you will learn VOLUMES!!!

I still go back to this thread from time to time when I realize something else i dont already know about

[alundra]

does the $80 circular saw have the bevel cutting? and what tool use this bit?

[Timoe]

its a router that uses that bit ^

You "should" use a router to make the slot cut for your t-molding.

If an arcade is the only thing you'll be using all these tools for though, I would really suggest finding a friend with the tools who might like to help you out.

I cant stress enough the FAQ thread, I'm addicted to it 

[Timoe]

Most circular saws ($80) have adjustable blades for both depth and angle (for bevel cuts)

[crashwg]

WTF is "diagnal"?

[AlanS17]

You mean I'm thew only one who uses his teeth? 

[Dire Radiant]

Nope. I use a crack team of specially trained beavers.