Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Hantarex us250 psu (DEAD) Help Please  (Read 1080 times)

0 Members and 1 Guest are viewing this topic.

fox donovan

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:June 06, 2005, 04:08:44 pm
  • I want to build my own arcade controls!
Hantarex us250 psu (DEAD) Help Please
« on: June 05, 2005, 01:24:02 pm »
O.k guys i'm having some problem with my hantarex us250 psu, It keeps blowing the f1 fuse, I opened up the unit and found this little carbon disk that seems to have blown i was told to remove it that i did then the fuses stoed blowing but then there was no power so resoldered it back and bang goes another fuse if theres anyone who knows about these psu's i would be very happy.

I can post pic's if it helps.

I'm in the uk.
Thanks guys

pcb

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 289
  • Last login:September 25, 2019, 05:27:26 pm
    • MikesArcade.com
Re: Hantarex us250 psu (DEAD) Help Please
« Reply #1 on: June 15, 2005, 02:46:57 am »
I'll be happy to email you the schematics if you want, but it may be best just to get a PC power supply.

The outputs are:

  +5 10A
   -5 1A
+12 2A
 -12 0.5A

Best,

 - Mike -