Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: XBoX And Hantarex MTC 9000  (Read 1425 times)

0 Members and 1 Guest are viewing this topic.

D-BlooD

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:June 07, 2005, 07:11:15 am
  • I want to build my own arcade controls!
XBoX And Hantarex MTC 9000
« on: June 04, 2005, 04:55:52 am »
Hi all :)

Is there anyone else that have a xbox hooked up to a MTC 9000? (I know some of you have them hooked up to newer models)

I have tryed hooking my XBoX to this monitor by connecting my RGB cable (with 100uF caps on RGB) straight to the MTC 9000 RGB. I also took Composit video from the RGB cable and hooked that to the MTC 9000 Vertical Sync. Everything seems to work fine this way, but (There is always a but aint there?
Logged

D-BlooD

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:June 07, 2005, 07:11:15 am
  • I want to build my own arcade controls!
Re: XBoX And Hantarex MTC 9000
« Reply #1 on: June 06, 2005, 01:13:44 pm »
added video amplifier, didnt solve the problem.

Anyone have a layout of how they connected theyr XBoX to a hantarex monitor? From the AVIP to the connector on the monitor.

Any help is appriciated.

-
D-BlooD
Logged

Dave_K.

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1807
  • Last login:July 06, 2022, 03:27:30 pm
    • Arcade Fever
Re: XBoX And Hantarex MTC 9000
« Reply #2 on: June 06, 2005, 07:22:06 pm »
Change the 100uf caps for 220uf.  And the composite sync out goes to Horizontal and vertical output goes to vertical.
Logged

D-BlooD

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:June 07, 2005, 07:11:15 am
  • I want to build my own arcade controls!
Re: XBoX And Hantarex MTC 9000
« Reply #3 on: June 07, 2005, 03:21:05 am »
Thank GOD for the oscilloscope ;) The LM1881N I picked of some other old equipment i made some years ago was broken ;) Thats the reason for the sync not working.
Logged

D-BlooD

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:June 07, 2005, 07:11:15 am
  • I want to build my own arcade controls!
Re: XBoX And Hantarex MTC 9000
« Reply #4 on: June 07, 2005, 07:11:15 am »
220uF caps didnt do much. I added the video amp i built last night and that solved the brightness problem. I will also try replacing some resistors on the monitor and see if that can bring the brightness up without using the video amp.

-
D-BlooD
Logged

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: XBoX And Hantarex MTC 9000
« Reply #5 on: June 08, 2005, 02:57:35 pm »
We sell a cable which does this.. yes you do need the LM3881 and in general it needs an extra capacitor from the input pin to ground, value 1nF. This is to deal with a level issue which most consoles have, which causes a noisy sync pulse.
I am sure you will need an amp with this monitor. Probably don't need the 220 uF capacitors though.
andy@ultimarc.com
Logged
Pages: [1]
  
Go Up
« previous next »