Asteroids & Defender CPs

[Ler6557]

Does anybody know the dimensions of the control panels for Asteroids and/or Defender?

[CIA_Guy]

What dimensions?  Spacing between controls, width/height, or both?

[Ler6557]

Just width/length.

[JoyMonkey]

Here's some measurements from the CPOs found at the Arcade Art Library
(Defender vectorized by Mahuti, Asteroids by Nannuu).

You could also check Jakobuds site for Defender measurements.

Edit: For those of us that don't visit the Artwork forum much; http://localarcade.com/arcade_art

[Ler6557]

Lots of help. Thanks JoyMonkey!

[paigeoliver]

That Defender size can't be right, I have owned several of them, and the panel is like 23" or 24" wide, I can't measure it until I get home, but I know the sucker has a panel wider than 20".

An asteroids panel is wider than that too.

[JoyMonkey]

I thought so too. Is there an inch or two either side of the CPO print area or something? Jakobud's Defender plans say that the CP is 24 1/2" wide.

[paigeoliver]

I thought so too. Is there an inch or two either side of the CPO print area or something? Jakobud's Defender plans say that the CP is 24 1/2" wide.

I dunno, my Defender currently has a Multiwilliams overlay, and previously had a Willis Defender overlay, it never had an original.

[ChadTower]

I can only speak on Asteroids Deluxe, but for AD the overlay goes right to the edge of the panel.  There is no open space.

[BSR]

I have an original Defender control panel sitting right next to me.
The exact dimensions are  24 1/2" x 7 15/16".
The top is cut at a bevel so the bottom side dimension is 7 5/8".