Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Can I reuse this chassis?  (Read 1401 times)

0 Members and 1 Guest are viewing this topic.

Humanoid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:February 12, 2010, 12:55:13 am
  • I want to Build My Own Arcade Controls!!
Can I reuse this chassis?
« on: March 15, 2005, 11:49:13 am »
So I just completed my custom cocktail cabinet last night; for the grand finale I was going to put the monitor in for the last time.  While placing the monitor into its custom mount, WWUUUSHHH!  The sound of air rushing into a broken tube! :'(  I spent the last 3 months building my cabinet around a 27" Gateway Destination monitor.  So the tube is obviously trash now, but can I reuse the chassis on a different tube?  The monitor was an 800x600 progressive (i.e. computer monitor) set with a lone vga input.  If you reply it will lift my spirits as I dwell on my loss.
My long desired cocktail is moments from completion, I just have to find those moments somewhere!

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Can I reuse this chassis?
« Reply #1 on: March 15, 2005, 12:06:59 pm »
I wouldn't know on computer monitors. My experience is with commercial arcade monitors.

menace

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2565
  • Last login:November 08, 2024, 01:49:35 pm
Re: Can I reuse this chassis?
« Reply #2 on: March 15, 2005, 12:11:05 pm »
yeah but good luck finding a donor tube--when pc monitors stop working most people chuck them and you'll need to find one compatible with that chassis (same model).  I guess at this point measure the vertical and horizontal ohms of the yoke and make a note of the number of pins in the necktube--who knows you might get lucky.
its better to not post and be thought a fool, then to whip out your keyboard and remove all doubt...

MonitorGuru

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 774
  • Last login:October 05, 2005, 11:29:43 pm
Re: Can I reuse this chassis?
« Reply #3 on: March 15, 2005, 12:14:40 pm »
If you found an idential tube then yes. Computer tubes arn't as interchangable as TV's/arcade monitors. Wide range of resolutions, phosphors, etc..

Plus, it probably had a significantly advance active yoke---in other words, rather than a simple wire wound yoke, it had PC boards with mini electromagnets and mutiple things wrapped around the yoke to allow you to do all the neat on-screen convergence, rotation, geometry control.

MonitorGuru

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 774
  • Last login:October 05, 2005, 11:29:43 pm
Re: Can I reuse this chassis?
« Reply #4 on: March 15, 2005, 12:18:22 pm »
yeah but good luck finding a donor tube--when pc monitors stop working most people chuck them and you'll need to find one compatible with that chassis (same model).

Wade

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1639
  • Last login:June 02, 2025, 11:48:57 pm
  • 80's Child
    • Wade's Gameroom
Re: Can I reuse this chassis?
« Reply #5 on: March 15, 2005, 04:19:58 pm »
IIRC the Gateway destination monitors are really just TV's with a VGA input on them.  They definitely don't have the image quality of a real PC monitor.  I think they are likely more related to a TV than a PC monitor.  It would be worth investigating the possibility of a tube swap, IMO.

Wade

Humanoid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:February 12, 2010, 12:55:13 am
  • I want to Build My Own Arcade Controls!!
Re: Can I reuse this chassis?
« Reply #6 on: March 15, 2005, 08:21:46 pm »
Yeah, thats what I loved about the monitor.  It looked like tv, but with better color/saturation and no annoying tv whine and the ability to actually read text at 800X600.
My long desired cocktail is moments from completion, I just have to find those moments somewhere!