Author Topic: Gigantic cocktail cabinet, 4 players, etc (Read 31174 times)

Com[Plex] · « **Reply #80 on:** May 18, 2005, 10:40:18 am »

Quote from: D5A1AC on May 18, 2005, 07:29:41 am

Quote from: NIVO on March 19, 2005, 07:20:55 pm
#3 Where is the button to push for the top to sink inside itself and flip over to show us the bumper pool table?

Haha you beat me to it, I was going to suggest you get a felt sheet and some sort of wall to turn it into a pool table

Com[Plex] · « **Reply #81 on:** May 18, 2005, 12:18:05 pm »

does anyone have any questions about this thing that they want answered? anything I should add or remove from the page that I have up for it?

dphirschler · « **Reply #82 on:** May 18, 2005, 01:29:22 pm »

One comment. Looks like the bottom is open. I would recommend sealing it off so little critters don't crawl up in there. And you really should use tempered glass.

But, man! that is cool. You cat looks nice too. Makes me miss mine.

Darryl

ras2a · « **Reply #83 on:** May 18, 2005, 03:15:04 pm »

Me too. ABSOLUTELY SUPERB !

Craig

Com[Plex] · « **Reply #84 on:** May 18, 2005, 03:47:32 pm »

Quote from: dphirschler on May 18, 2005, 01:29:22 pm

One comment.

Com[Plex] · « **Reply #85 on:** May 19, 2005, 09:52:03 am »

Quote from: danny_galaga on February 24, 2005, 05:58:04 am

dphirschler · « **Reply #86 on:** May 19, 2005, 12:57:59 pm »

Quote from: Com[Plex

I dont have any cretters in the house small enoguh to worry about, and the chassis really is only an inch off the floor.

Make sure you keep a cat in the house, or critters (mice) will move in. They will like it inside the nice warm cabinet and close to food. Who knows... bugs might even like it in there.

Darryl

Com[Plex] · « **Reply #87 on:** May 19, 2005, 07:29:32 pm »

Quote from: dphirschler on May 19, 2005, 12:57:59 pm

Make sure you keep a cat in the house, or critters (mice) will move in.

teetu · « **Reply #88 on:** May 19, 2005, 07:36:29 pm »

Quote from: Com[Plex] on May 19, 2005, 07:29:32 pm

has anyone else used wooden dowels to fill in the screw holes like i did?

it's funny u mention that, cause I was thinking of doing it myself since wood filler takes a while to dry. How did it work out for you?

Com[Plex] · « **Reply #89 on:** May 19, 2005, 07:53:44 pm »

Quote from: teetu on May 19, 2005, 07:36:29 pm

Quote from: Com[Plex] on May 19, 2005, 07:29:32 pm

has anyone else used wooden dowels to fill in the screw holes like i did?

it's funny u mention that, cause I was thinking of doing it myself since wood filler takes a while to dry.

Com[Plex] · « **Reply #90 on:** November 11, 2005, 01:50:45 pm »

update:
got this new controller I built from welding a trackball to a very tiny keyboard made for a playstation. check it out!
http://www.angrymods.com/carpc/controller

from this

to this

to this!

arcadefever · « **Reply #91 on:** November 11, 2005, 11:10:02 pm »

wowwwwwwwwwwwwwww this is one of the best cab ever !
what a genius you're,

this cab is unique and well done, imagine how many married man can now present this project to there wifes

congratulation i LOVE IT !!!!!!

meanbean · « **Reply #92 on:** November 18, 2005, 09:23:55 am »

Just an incredible job Com[Plex].

AtomSmasher · « **Reply #93 on:** November 18, 2005, 08:35:05 pm »

Holy crap that is awesome. This is the first time I've noticed this thread and I'm glad I did. I couldn't figure out what to do for my next project, but seeing this thing just gives me so many ideas that I know I'll eventually build something similar.

Awesome job.

rlemmon · « **Reply #94 on:** November 20, 2005, 07:34:39 am »

Wow !

ZXR · « **Reply #95 on:** May 22, 2006, 01:18:17 am »

Sorry to revive this thread, but it's something that new people to the site need to see. I can't believe it's not on the Hall of Fame page myself...

Have plans been made up for this as it's totally the sort of thing I'd love to build now that I'm starting to get a good collection of tools.

-ZXR

Com[Plex] · « **Reply #96 on:** June 22, 2006, 08:25:34 pm »

Hey there, nice to see that people still like my cab.

I didnt have any plans for this, but I could probably sketch some up. I pretty much just winged it. I knew what I wanted and I went for it.

I could sketch up the plans easy enough,. if there is an actual demand for em

Com[Plex] · « **Reply #97 on:** June 22, 2006, 08:52:20 pm »

oh yeah, the link to my incomplete writup about the proccess of building this, is on www.angrymods.com/mame

Com[Plex] · « **Reply #98 on:** June 24, 2006, 09:18:46 pm »

in case anyone had doubts as to whether you could convince your wife to let you have this as a dining room table, here is an example.

it has a nice pair of speakers inside of it, and when we have dinner guests we like to play portishead or something easy with the winamp visualizations going on the screen. it certainly adds to the ambience of the event.

loadman · « **Reply #99 on:** June 25, 2006, 01:57:51 am »

I don't know what FE solution you choose (i could not see it) but I think that beast would benefit from MaLa fe rotation options I think, especially as there are diffrent controlls om each side. You can have the gamelist change depending on what side it is rotated.

Nice work.

I waiting for someone to build a mame cab you can play in the pool

Com[Plex] · « **Reply #100 on:** July 09, 2006, 09:36:42 am »

Quote from: loadman on June 25, 2006, 01:57:51 am

I don't know what FE solution you choose (i could not see it) but I think that beast would benefit from MaLa fe rotation options I think, especially as there are diffrent controlls om each side. You can have the gamelist change depending on what side it is rotated.

Nice work.

I waiting for someone to build a mame cab you can play in the pool

dude, that looks awesome! where can I get that?

gamecreature · « **Reply #101 on:** July 09, 2006, 10:15:38 am »

Quote from: Com[Plex] on July 09, 2006, 09:36:42 am

dude, that looks awesome! where can I get that?

http://mala.arcadezentrum.com/

Com[Plex] · « **Reply #102 on:** July 09, 2006, 10:22:20 am »

Quote from: gamecreature on July 09, 2006, 10:15:38 am

Quote from: Com[Plex] on July 09, 2006, 09:36:42 am

dude, that looks awesome! where can I get that?

http://mala.arcadezentrum.com/

thanks!

Com[Plex] · « **Reply #103 on:** July 10, 2006, 01:49:32 pm »

So, this is just a feeler, but I am thinking about selling the arcade... it doesnt get a lot of use where it is, and I could really use the money for parts for my race car (my new hobby)

if I were to put this up for sale, completely with the 2ghz computer inside, etc etc.
how much should I ask for it?

its still in great shape. I have kept it in nearly immaculate condition. it has a great finish on it. and the glass is virtually scratch free.

it weighs 400 lbs, so local pickup is pretty mandatory.
(I live in Maine)

DrewKaree · « **Reply #104 on:** July 10, 2006, 06:10:32 pm »

Quote from: Com[Plex] on July 10, 2006, 01:49:32 pm

if I were to put this up for sale, completely with the 2ghz computer inside, etc etc.
how much should I ask for it?

I think a fair price for me to give you for it is $30, and to sweeten the deal, I'd pay that in C-A-S-H money! Now I just need your address and a n agreed-upon time when I can stop by and pick it up. Since I will be driving from WI, I will need directions, for which I am also willing to pay the princely sum of $10 for your troubles, and if you drive back with me and help me see if it fits in my basement.....

AtomSmasher · « **Reply #105 on:** July 10, 2006, 07:25:56 pm »

Quote from: Com[Plex] on July 10, 2006, 01:49:32 pm

and I could really use the money for parts for my race car (my new hobby)

now that is an expensive hobby, your going to need all the money you can get. I went from that hobby to this one largely because this one is much more affordable. What kind of car do you have?

Com[Plex] · « **Reply #106 on:** July 11, 2006, 09:06:57 am »

Quote from: AtomSmasher on July 10, 2006, 07:25:56 pm

Quote from: Com[Plex] on July 10, 2006, 01:49:32 pm
and I could really use the money for parts for my race car (my new hobby)
now that is an expensive hobby, your going to need all the money you can get. I went from that hobby to this one largely because this one is much more affordable. What kind of car do you have?

I got a vw gti. 16v 2.0. its screams. just picked up two close ration racing transmissions for it.
here is us on the cover of killboy.com

Com[Plex] · « **Reply #107 on:** June 26, 2007, 08:59:03 am »

still thinking about selling this.

Im considering putting a 3,000$ price tag on it and trying t sell it locally.

what does a brand new arcase machine go for? (non mame)

spystyle · « **Reply #108 on:** April 18, 2008, 11:06:25 am »

W00T !!!

Franco B · « **Reply #109 on:** April 18, 2008, 01:00:19 pm »

Ooook, thats a normal reply to resurrect a thread!

It is an awesome cab tho

Did you sell it in the end Com[Plex]?

Com[Plex] · « **Reply #110 on:** April 18, 2008, 11:04:29 pm »

Quote from: Franco B on April 18, 2008, 01:00:19 pm

Ooook, thats a normal reply to resurrect a thread!

It is an awesome cab tho

Did you sell it in the end Com[Plex]?

no actually, I still have it. dont use it nearly as much anymore tho... I should still consider posting it for sale

DJ Infinity · « **Reply #111 on:** April 19, 2008, 09:49:58 pm »

Can I have it plz? I'd pay for shipping

Excellent original design

Com[Plex] · « **Reply #112 on:** April 20, 2008, 10:28:43 pm »

Quote from: DJ Infinity on April 19, 2008, 09:49:58 pm

Can I have it plz? I'd pay for shipping Excellent original design

hahah, yeah, could happen. No ones shown me any real interest in purchasing it. I would consider any reall offer. bu I dont know what its worth..

DJ Infinity · « **Reply #113 on:** April 21, 2008, 12:03:29 am »

I couldn't afford it right now.

but it would be a welcome addition here.

Com[Plex] · « **Reply #114 on:** April 21, 2008, 08:39:04 am »

Quote from: DJ Infinity on April 21, 2008, 12:03:29 am

I couldn't afford it right now. but it would be a welcome addition here.

most of us couldnt afford it, thasts why we build them ourselves

Id probably let it go for a little more than what I have into it.

anyone care to guess how much that is?

Stub · « **Reply #115 on:** April 21, 2008, 02:42:52 pm »

hmmm maybe, 400 in controls, 500 wood laminate trim and glass, 600 for the pc?

Com[Plex] · « **Reply #116 on:** April 22, 2008, 02:23:27 am »

Quote from: Stub on April 21, 2008, 02:42:52 pm

hmmm maybe, 400 in controls, 500 wood laminate trim and glass, 600 for the pc?

I think you are pretty close actually. I think I was closer to 1600 actually, but that was a while back so its hard to remember exactly...


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news