Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: WG D-9200: mounting / power cord  (Read 1175 times)

0 Members and 1 Guest are viewing this topic.

JCKnife

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 261
  • Last login:November 04, 2008, 09:41:57 pm
WG D-9200: mounting / power cord
« on: February 18, 2005, 03:49:26 pm »
Cab project is nearing final assembly. Two questions on my WG D9200 monitor:

1. I was planning to mount it without actually using a shelf but rather by mounting 3 lengths of 2x4's: two underneath and one for the top bracket. Will this be enough to support it? (figuring I'll mount the 2x4's with two 2" screws at each end coming in from the outside of the MDF, plus glue)

2. Dumb question: where does the damn power cord plug into the monitor? The supplied documentation is pretty shoddy.
Logged

Bones

  • [Moderator]
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3995
  • Last login:July 26, 2021, 11:34:03 pm
Re: WG D-9200: mounting / power cord
« Reply #1 on: February 18, 2005, 07:22:18 pm »
I can't answer your question, but please let is know how your mounting method works out if you do go this way.
Logged

Living the delusional lifestyle.

chessmayhem

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:February 27, 2005, 07:56:06 pm
Re: WG D-9200: mounting / power cord
« Reply #2 on: February 19, 2005, 11:10:24 pm »
Power cord plugs in near the back left hand corner (looking from the back) of the main circuit board.
Logged

JCKnife

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 261
  • Last login:November 04, 2008, 09:41:57 pm
Re: WG D-9200: mounting / power cord
« Reply #3 on: February 27, 2005, 04:40:55 pm »
FYI for anyone wondering about this...I built this test case out of scrap MDF and a 2x4. The board is fastened with two 3" screws at each end. I was able to stand on the board and even jump up & down a little. I'm 6' 7" and just over 300 lbs. It'll surely hold the monitor.

Logged
Pages: [1]
  
Go Up
« previous next »