Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Capacitor question  (Read 1014 times)

0 Members and 1 Guest are viewing this topic.

GuinnessGuy74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 36
  • Last login:November 08, 2011, 11:01:43 am
  • I want to build my own arcade controls!
Capacitor question
« on: January 20, 2005, 04:09:22 pm »
I am trying to identify this capacitor:

MYR .022 10% 50v

What type is it? I have never seen MYR before, I am assuming the R stands for radial?

Thanks,
Jim
« Last Edit: January 20, 2005, 04:15:26 pm by GuinnessGuy74 »
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Capacitor question
« Reply #1 on: January 20, 2005, 06:12:45 pm »
MYR is an abbreviation for mylar (a.k.a. polyester or metal film). Radio Shack # 272-1066 will work.
« Last Edit: January 20, 2005, 06:35:56 pm by Ken Layton »
Logged

GuinnessGuy74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 36
  • Last login:November 08, 2011, 11:01:43 am
  • I want to build my own arcade controls!
Re: Capacitor question
« Reply #2 on: January 20, 2005, 07:45:06 pm »
Thanks Ken, I figured it was a mylar, but wanted to be sure! I didn't want to "assume" and then blow the monitor up. I wound up not needing it anyway, since it was soldered directly between pins on the IC. I didn't see it on the component side and thought it might have broken off because I saw some solder coming through the hole!

Thanks, Jim
Logged
Pages: [1]
  
Go Up
« previous next »